About The Hub
An institutional repository (IR) collects, preserves, and disseminates in digitial form, the intellectual output of an institution. IRs usually provide open access on items held within the IR. The “HKU Scholars Hub” is the IR for HKU. ISSN: 2310-7294.
An author's work is only placed in the Scholars Hub after we have confirmed that publisher's policy permits the item to be self-archived in our institutional repository. Most publishers, allow some form of self-archiving, although the version of the work that may be used, and the conditions imposed, vary from one publisher to another.
The Hub closely follows the defintions describing publishers' policies, estalished by Sherpa Romeo. This UK based database contains many hundreds of publishers' policies, and is updated and maintained from funding bodies in the UK, it is administered from the University of Nottingham. This database is often cited as the source of the policy information used in the Hub's own publisher policies database.
Definitions of the most common policy terms used in the Hub:
Postprint: The version of the article after peer review, with revisions suggested by peer review having been made.
This means that in terms of content, a post-print is the article as published. However, in terms of appearance, this might not be the same as the published article, as publishers often reserve for themselves their own arrangement of type-setting and formatting. This also means that in many cases an author cannot use the publisher's (or final) pdf file, for submission to the Hub. However, authors can create their own pdf or have Hub staff do this for them. Having said this, some publishers that allow post-print archiving, insist that authors do use the publisher generated pdf of the final version.
Other publishers, and funders such as NIH or the Wellcome Trust, use other names for a post-print. Some of these alternative names are:
- “Author's final copy”
- “Author's version”
- “Author's manuscript”
Pre-print: A preprint is the author's version of the article before peer review.
Self-archiving: This term is often used to describe the author's right to submit and deposit a digital copy of some version of the article (preprint, postprint, or published version) on the author's personal web page, his or her departmental web page, or in an institutional repository such as the Hub.
Conditions: Publishers that allow self-archiving often impose conditions. An example of one publisher's conditions is shown below as an example:
An author may self-archive an author-created version of his/her article on his/her own website and his/her institution's repository, including his/her final version; however he/she may not use the publisher's PDF version which is posted on www.springerlink.com. Furthermore, the author may only post his/her version provided acknowledgement is given to the original source of publication and a link is inserted to the published article on Springer's website. The link must be accompanied by the following text: “The original publication is available at www.springerlink.com”.
Embargo Period: A publisher may allow posting of a version of the article to the Hub after an “embargo period”. This means the author may not submit to the Hub until a number of months after the journal publication date. The length of the embargo period (6 months - 12 months etc) varies depending upon the publisher.
Permision Required Statement: The publisher allows authors to deposit a specified version of their article in the Hub, using a permission statement.
Items in open access (OA) are digital, online, free of charge, and free of most copyright and licensing restrictions. Users anywhere in the world may read, download, copy distribute, print, search, or link to these items.
A growing number of research funders now make it a condition of grant that a duplicate of any research paper be placed in a Repository for open access. These mandates are applied as a condition of grant, so resulting research papers can have archiving conditions already attached before submission to any journal.
Open access Publishing: When referring to OA publishing, it is important to distinguish between two different approaches, sometimes called Gold OA and Green OA. The distinction between gold and green is only about venues, and not about user rights, or “fee or free”. The two approaches are defined below:
Green OA: the author self-archives into his or her personal web page, departmental web page, or institutional repository, some version of his or her article (preprint, postprint, or published version).
Gold OA: the publisher places the authored item in open access within the published journal. Some journals are OA, without fees involved. Other journals may charge the author, his or her institution or funding body, an “OA charge” so that the article may be placed in OA. This last model is sometimes called the “hybrid model”. The usual fee is US$ 3,000 per article.
The two approaches are not incompatible and can co-exist. Other conditions may or may not also be involved, such as embargoes, permission statements, etc.
Further reading on Open Access
SCOPUS is an international abstract and citation database of peer-reviewed literature and quality web sources. SCOPUS covers more than 15,000 peer-reviewed journals in science, technology, medicine and social sciences from over 4,000 international publishers. The SCOPUS Citation Tracker records citations data year by year for a specific author or topic.
If a Hub article has been tracked in SCOPUS there is note at the end of the Hub meta data record that gives the number of citations made to the item, and a link to the tracked record in the SCOPUS database.
More information on SCOPUS citation tracking is available on the SCOPUS web site.
The Hub uses the DSpace system software jointly developed by MIT and Hewlett Packard. Many organisations and scholarly institutions also use Dspace for building their institutional repositories. Dspace comes with the powerful Lucene search engine and the Hub has further enhanced search and retrieval capabilities by integrating content with Elsevier's full text retrieval software SCIRUS, and also the SCOPUS citation analysis tracking system.
The Hub's Home Page has a “Quick Search” form. Terms entered in this form search the entire collection and retrieve records with matching words from any of the following Hub fields: author, title, abstract or series name.
Quick Phrase Searches
To search for multiple words as a phrase or name, place quotation marks around the words. For example, to search for an exact phrase such as “climate change” enclose the phrase in quotation marks as indicated in the following illustration:
Quick Search of The Hub for:
Quick Name Searches - where the exact name is known
Quick Searches for author names work best when enclosed in quotations. For example, “TSE, TH” will retrieve all works with this name.
Quick Name Searches - where the exact form of name is unknown
The Hub uses the author's name as it appears on each work or article. If an author writes under varied forms of name, then each variation will appear in the Hub's author name index. Browsing the author name index may be more effective than a Quick Search where the exact form of name is not known.
Search Scripts on Author Names
The following example of a URL script provides a quick and easy alternative method to the Quick Search form:
In the above example, cai is the author's surname and ZX are the author's initials.
The following example illustrates the script for an author with more than one first name:
Quick Searches with Multiple Words
If two or more words are entered as a Quick Search, but are not enclosed within quotes to indicate a phrase, the “OR” search operator is automatically applied, for example:
climate OR change
TSE OR TH
The results from these Quick Searches based on the OR operator will be very broad and non-specific.
The Hub search engine ignores certain words that occur frequently in English. The Hub's stop words are:
a, and, are, as, at, be, but, by, for, if, in, into, is, it, no, not, of, or, the, to, was
This means it is not necessary to include any of these words in a phrase search such as “justice of the peace” or “justice and peace” or “teaching and learning” as they are ignored.
This feature is automatically applied to Quick Searches. Stemming means that any word is expanded to automatically include plurals and past tense and other extensions. This means that a search for the word age automatically retrieves, records with ages, aged, aging.
Truncation is an optional search feature that can be applied by end users. A truncated search requires the symbol
* to be added near to the end of a search term. For example a search for
inf* retrieves records with influenza, inference, infection, etc.
Exact word search
A plus sign
+ before a word means this word must appear in the results, e.g.
+English language, the word English must appear in the results but language is optional.
A minus sign
- before a word will eliminate this particular word from the result. (Upper case
NOT will also produce the same as the minus sign) e.g.
An Advanced Search provides more specific retrieval than a Quick Search. Phrase, stemming, and truncation are also available for Advanced Searches, but an Advanced Search can also:
limit a search to one or more selected fields, or to a selected Hub community;
combine search elements
The illustration below shows a search of all the Hub's Communities (that is everything in the Hub) for the phrase “higher education” in the Title field only, but excluding any records that contain the words Hong Kong in any field.
It is also possible to search for a Hub record by a “persistent identifier” or “Handle Number”.
Dspace provides a stable point of reference for any resource in the repository by allocating a unique Handle Number. Because web sites can disappear, or be reconfigured without notice, references (links) to research results can disappear without trace. A core feature of Dspace is the creation of “persistent identifiers” for every item, collection and community stored in DSpace.
A “persistent identifier” is the name for a resource which will remain the same, regardless of where the resource is located. Therefore links to the resource will continue to work even if it is moved.
Dspace Handles were chosen in preference to persistent URLs because of the desire to support citations to items in DSpace over very long time spans. Handles in DSpace are currently implemented as URLs, but can also be modified to work with future protocols. For more information: General Dspace FAQ at MIT Libraries and also about CNRI Handle System for creating these identifiers.
The Hub supports Browsing by author, title or community.
The Browse list uses letter-by-letter sorting. This means that the order of the entries is based on each character in a word, without regard for spaces or punctuation. For example, the following author list shows that MaCallum sorts after Ma, C. but before Ma, CH
Example of the Author Browse sorting order
The HKU Strategic Development plan for 2009-2014 sets out three strategic themes, one of which is Knowledge Exchange (KE).
As a centre of intellectual development, creativity and informed social awareness, the University will ensure that knowledge exchange contributes to regional and global development, and increase the opportunities for staff and students to benefit from the commercialization and application of their expertise.
RPs display, enable, and measure HKU KE. They also allow industry, government and academia to find an HKU expert for contract research, consulting, and collaboration. After initial creation by HKU Scholars Hub Team, they allow the owning individual to further sustain and enhance their own RPs. More enhancements are currently being planned. We welcome your suggestions!
Every month the Hub receives a list from HKU Registry of new staff. We create RPs for each staff with a UGC Grade A ~ I. We will also create an RP, if you are currently employed, have authored items, and wish to be included. For this, please write to email@example.com.
- Name, Address, etc: Department web pages, Registry, etc.
- Publications, Honours, Awards, Prizes, Patents, etc.: We received daily updates from the HKU Research Output System (ROS), and after correcting what can be corrected, we upload to The Hub on a monthly basis.
- Patents: We receive a quarterly update from Versitech. These are enhanced with data from USPTO and other patent databases.
- Media Contact Directory: the Media Contact Directory created and maintained by the HKU Communications and Public Affairs Office. Updated monthly.
- Community Service: We receive this data from HKU CPAO.
- Knowledge Exchange Activities: We receive this data from the Knowledge Exchange Activities System (KEAS).
- Supervision of Research Postgraduate Students: We receive this data monthly from the Postgraduate Student System maintained by the HKU Graduate School.
- (HKU) Committee Appointments: We receive this data from the General Services of the Registry.
- Bibliometric Details: These are extracted from Scopus, ResearcherID (Web of Science) and others. Data in the RPs are updated weekly.
Please click on “HKU Login” on the top menu with your HKU Portal ID and PIN. A new additional orange menu, “Edit Researcher Page”, will then appear on the upper right side.
Edit ResearcherPage: After clicking through, user can edit any of the five sections of the ResearcherPage; i) Profile, ii) Publications, ii) External Relations/University Responsibilities, iv) Grants, or iv) Bibliometrics. In the Profile page, user may change/add/delete/hide data in these boxes:
- Variant Name(s)
- Research Interest(s)
- Curriculum Vitae
- My URL(s)
- Professional Qualifications
On any data element, user can click on a to add items, to delete, or to hide the element from public display. After you are done, please make sure to click the button at the bottom of the page to save your updates.
Data in other boxes are harvested from external sources, and can only be changed by submitting request to the original sources. There is a green text message in every box giving instructions on how changes can be made. In summary:
- For data change, write to firstname.lastname@example.org.
Manage Publications: Users may choose certain of their publications to “Hide”, or to place in a “Selected Publications” box. Hidden publications will still be searchable in The Hub, but not displayed on a RP. An example of possible use is, an author may wish to hide a conference presentation that later become a journal article. The “Selected Publications” box, if made, will appear first before any other publication category box, on the public RP. Please remember to click on “Save Changes” after making changes here.
Scopus: In the Scopus database, researchers are automatically assigned a Scopus ID. However, name variations often result in multiple IDs for a single author. As such, researchers who wish to merge Scopus Author profiles under a single unique ID can fill out the Author Feedback Wizard. Enquiries on Scopus data can be made via the Ask a Question e-Form.
ResearcherID: Researchers can create a ResearcherID by building your publication list from Web of Science or by uploading their publication list to the website. This unique ID will avoid author misidentification and can generate more accurate citation metrics based on your publication list. To ensure bibliometrics are up-to-date and accurate, researchers are advised to regularly maintain and update the publication list in their profile. For more information, refer to FAQ and online tutorial.
There are four ways to do so.
- If you have the fulltext of the item, and you know that the publisher allows us to re-post (cf. “Publisher Policies” and “Open Access” above), then please send this to email@example.com, with a short note saying you allow it to re-appear in the Hub.
- HKU Research Output System
- At the end of each academic year, HKU researchers are requested to enter details of their research output in the HKU Research Output System (ROS). This later becomes the HKU Research & Scholarship. In the input screens for ROS, there is a tick box giving the Hub permission to include, and a box for attaching files. Files attached here will come to us for upload to the Hub. Please note, we can get the published version from the Libraries' subscriptions. However few publishers allow this version. However many publishers will allow an “author's manuscript” (or, postscript). Therefore, do not attach the published version, but rather, the author's manuscript, which we can get only from you.
- HKU researchers may enter items into ROS that may have been missed in previous years. ROS will accept these retrospective items, as long as they carry a publication year during which the HKU staff was employed at HKU. The input screen can be found after entering HKUPORTAL → My Page → Self Service → Research → Research Outputs. Retrospective data entered here will also be sent to The Hub.
- We will accept RIS files to update the publication lists in the Hub. You can create RIS files by exporting from Endnote, Scopus, Web of Science and other sources. Or, you could tell us from where we may take such a file for you.
- Curriculum Vitae holding your publication list. In your RP, you may input a URL pointing to your CV. Or, you may upload a CV to your RP. Please note that the data in your CV, will not merge with the publication lists in the Hub.
Before 2010, the Hub only included entries for items that could be displayed in open access; those for which we had fulltext, and permission from the author and publisher. But with it's greater role in HKU Knowledge Exchange, in 2010 the Hub began to import and display all items from HKU Research & Scholarship (otherwise known as HKU Research Output System [ROS]). In the coming months data from Scopus, Web of Science, and PubMed will also be imported to The Hub, and deduped against existing Hub data.
If you have a ResearcherPage and wish to ask one of your staff, for example your executive officer (EO), to make changes for you, you may set up the special password below. After you do this, you will have 2 login methods, the existing one using the LOGIN button on the top of the page, with your HKU Portal ID. And, a new one, “Guest Login” (also at top of page). To set up this Guest Login for your EO:
- Please go to http://hub.hku.hk/password-login. Input the email address shown on your ResearcherPage. If your RP shows 2 addresses, use the first one.
- Enter no Password. Do NOT click on “Log In”. Rather, please click on “Have you forgotten your password”.
- The owner of the RP will receive email from the Hub with a link to define a new password. This new password need not be the same as the one used in hkuportal login.
- Please give the email address you used in this process, and the new password to your EO.
- The EO can now click on “Guest Login” at the top of the page, login, and edit your ResaercherPage.
- For problems with this process, please write to, firstname.lastname@example.org.
The Research Postgraduate Profile Pages is a knowledge exchange initiative of the University to enhance the visibility of HKU Research Postgraduates (RPg). The first batch of RPg Profile Pages is released in April 2017.
Data in RPg Profile Pages are pre-populated from HKU's central databases. They include:
- Student name / Email
- Curriculum / Program
- Department / Faculty
- Field of study
- Name of supervisors
- Thesis information
For data change request concerning pre-populated information, students should contact their Faculty Office. The latest information will then be reflected in the next profile update.
Students can edit their own profiles. To do so, click on “HKU Login” on the top menu and login with the HKU Portal ID and PIN. A new orange button “Edit RPG” will then appear in the Profile Page.
After clicking the “Edit RPG” button, students may enrich their profile with the following information:
- Research interests
On any data element, except for the basic information including student name, programme/curriculum, department, and name of supervisor, students can click on to add items, to delete, or to hide the element from public display. Once the editing is done, click the button at the bottom to effect the changes.
Students may wish to note the following terms and conditions of the RPg Profile Pages:
- Information pre-populated from the University's central databases will be made public in the Profile Page.
- Students may input additional information in the Profile Page where applicable; whereas the HKU Libraries is not responsible for the content veracity and authenticity of such information.
- Students may hide certain information in the Profile Page where applicable; whereas information once made public may be archived, captured, crawled, indexed, and/or recorded by search engines and/or third parties; and the HKU Libraries is not responsible for consequences arising from such information disclosure.
- The HKU Libraries reserves the right to suppress an RPg Profile Page.
- The HKU Libraries reserves the right to amend/change the said terms and conditions.
The Research Postgraduate (RPg) Profile Pages is a collaborative effort of the Knowledge Exchange Office, the Graduate School and the Libraries.
We encourage our colleagues in other departments of HKU to re-use the data they find in our pages. There are several ways to do this.
- The easiest method is simply to link to pages in the Hub, already displaying the required information. The staff pages of several HKU departments now do this.
- There is an EXPORT button that appears in various places, allowing you to export all the publications of one author, or one department
- We have a Web Service that can be used, upon registering with us, to export any data element in the Hub. This could be used to build staff pages for your department. But of course perhaps method number 1 above already answers this.
- If you need a special report or formatting of data, please write to us, and let us see what can be done. email@example.com
The Hub project began as a means to provide visibility on, and attract discovery to the research and expertise of HKU. However the Hub and its many pages can serve many other purposes. To illustrate this, we made a presentation at a KE Lunch meeting using questions given to us from a staff that previously worked in the Faculty of Medicine's Administration office. These questions were ones that she received in the normal course of her work there, and which caused her many hours of searching, and then re-compiling of information. On making this presentation both she and we were surprised to find that pages in the Hub can answer these questions now, with no further effort required. This presentation,