Recording of natural head position using stereophotogrammetry: A new technique and reliability study

Abstract

The purpose of this study was to develop a technique to record physical references and orient digital mesh models to natural head position (NHP) using stereo-photogrammetry (SP). The first step was to record the digital mesh model of a hanging reference board placed at the capturing position of the SP machine. The board was aligned to the true vertical using a plumb bob. It was also aligned with laser plane parallel to the hanging mirror which was located at the center of the machine. Parameter derived from the digital mesh model of the board was then used to adjust the roll, pitch and yaw of the subsequent captures of subjects. This information was valid until the next machine calibration. The board placement was repeatable with standard deviation of less than 0.1 degrees for both pitch and yaw; 0.15 degrees for roll angles.