File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Effects of surface treatments on shear bond strengths between a resin cement and an alumina core.

TitleEffects of surface treatments on shear bond strengths between a resin cement and an alumina core.
Authors
Issue Date2000
PublisherMosby, Inc. The Journal's web site is located at http://www.elsevier.com/locate/prosdent
Citation
The Journal Of Prosthetic Dentistry, 2000, v. 83 n. 6, p. 644-647 How to Cite?
AbstractSTATEMENT OF PROBLEM: Although bonding to all-ceramic restorations is desirable, there is little information on the use of resin cements containing a phosphate monomer, and the importance of different surface treatments on their adhesion to high-strength core materials. PURPOSE: This study attempted to determine the shear bond strength values between Panavia 21 resin cement (Kuraray) and an alumina core material (In-Ceram) after 3 surface treatments and the application of a silane coupling agent. MATERIAL AND METHODS: Forty-five In-Ceram cylindrical rods were fabricated and assigned to 3 groups. Group I specimens were treated with a 9.5% hydrofluoric (HF) acid, group II with a 5% HF acid, and group III were sandblasted. All specimens were coated with a silane coupling agent (Cavex Clearfil Photobond and Activator) before cementation with Panavia 21 to sandblasted nickel-chromium rods. As a control, group IV consisted of 8 porcelain (Vitadur Alpha) rods treated with a 5% HF acid and silane. All specimens were subjected to a load of 1.2 kg during cementation, then stored under water for 36 hours. A jig mounted on a Hounsfield Universal Testing machine was used at a crosshead speed of 0.5 mm/min to test the shear bond strengths. RESULTS: The results were 14.65 +/- 4.64 MPa for group I, 18.03 +/- 6.13 MPa for group II, and 22.35 +/- 5.98 MPa for group III In-Ceram specimens; and 18.05 +/- 8.46 MPa for control (group IV). CONCLUSION: The use of Panavia 21 resin cement and a silane coupling agent can achieve a successful bond between either sandblasted or 5% HF acid-etched In-Ceram core material.
Persistent Identifierhttp://hdl.handle.net/10722/66139
ISSN
2023 Impact Factor: 4.3
2023 SCImago Journal Rankings: 1.177
ISI Accession Number ID

 

DC FieldValueLanguage
dc.contributor.authorMadani, Men_HK
dc.contributor.authorChu, FCen_HK
dc.contributor.authorMcDonald, AVen_HK
dc.contributor.authorSmales, RJen_HK
dc.date.accessioned2010-09-06T05:43:54Z-
dc.date.available2010-09-06T05:43:54Z-
dc.date.issued2000en_HK
dc.identifier.citationThe Journal Of Prosthetic Dentistry, 2000, v. 83 n. 6, p. 644-647en_HK
dc.identifier.issn0022-3913en_HK
dc.identifier.urihttp://hdl.handle.net/10722/66139-
dc.description.abstractSTATEMENT OF PROBLEM: Although bonding to all-ceramic restorations is desirable, there is little information on the use of resin cements containing a phosphate monomer, and the importance of different surface treatments on their adhesion to high-strength core materials. PURPOSE: This study attempted to determine the shear bond strength values between Panavia 21 resin cement (Kuraray) and an alumina core material (In-Ceram) after 3 surface treatments and the application of a silane coupling agent. MATERIAL AND METHODS: Forty-five In-Ceram cylindrical rods were fabricated and assigned to 3 groups. Group I specimens were treated with a 9.5% hydrofluoric (HF) acid, group II with a 5% HF acid, and group III were sandblasted. All specimens were coated with a silane coupling agent (Cavex Clearfil Photobond and Activator) before cementation with Panavia 21 to sandblasted nickel-chromium rods. As a control, group IV consisted of 8 porcelain (Vitadur Alpha) rods treated with a 5% HF acid and silane. All specimens were subjected to a load of 1.2 kg during cementation, then stored under water for 36 hours. A jig mounted on a Hounsfield Universal Testing machine was used at a crosshead speed of 0.5 mm/min to test the shear bond strengths. RESULTS: The results were 14.65 +/- 4.64 MPa for group I, 18.03 +/- 6.13 MPa for group II, and 22.35 +/- 5.98 MPa for group III In-Ceram specimens; and 18.05 +/- 8.46 MPa for control (group IV). CONCLUSION: The use of Panavia 21 resin cement and a silane coupling agent can achieve a successful bond between either sandblasted or 5% HF acid-etched In-Ceram core material.en_HK
dc.languageengen_HK
dc.publisherMosby, Inc. The Journal's web site is located at http://www.elsevier.com/locate/prosdenten_HK
dc.relation.ispartofThe Journal of prosthetic dentistryen_HK
dc.rightsJournal of Prosthetic Dentistry. Copyright © Mosby, Inc.en_HK
dc.titleEffects of surface treatments on shear bond strengths between a resin cement and an alumina core.en_HK
dc.typeArticleen_HK
dc.identifier.openurlhttp://library.hku.hk:4550/resserv?sid=HKU:IR&issn=0022-3913&volume=83&spage=644&epage=647&date=2000&atitle=Effects+of+surface+treatments+on+shear+bond+strengths+between+a+resin+cement+and+an+alumina+coreen_HK
dc.identifier.emailChu, FC: cschu@hkucc.hku.hken_HK
dc.identifier.authorityChu, FC=rp00035en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1016/S0022-3913(00)70063-1-
dc.identifier.pmid10842131-
dc.identifier.scopuseid_2-s2.0-0034202903en_HK
dc.identifier.hkuros50273en_HK
dc.identifier.volume83en_HK
dc.identifier.issue6en_HK
dc.identifier.spage644en_HK
dc.identifier.epage647en_HK
dc.identifier.isiWOS:000087689600009-
dc.publisher.placeUnited Statesen_HK
dc.identifier.scopusauthoridMadani, M=37059234900en_HK
dc.identifier.scopusauthoridChu, FC=7201881096en_HK
dc.identifier.scopusauthoridMcDonald, AV=7203088625en_HK
dc.identifier.scopusauthoridSmales, RJ=7005372382en_HK
dc.identifier.issnl0022-3913-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats