File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Deformation and recrystallization of interstitial free (IF) steel

TitleDeformation and recrystallization of interstitial free (IF) steel
Authors
KeywordsDeformation
IF steel
Recrystallization
SIBM model
Texture
Issue Date2011
PublisherTaylor & Francis Inc. The Journal's web site is located at http://www.tandf.co.uk/journals/titles/1042-6914.asp
Citation
Materials And Manufacturing Processes, 2011, v. 26 n. 1, p. 51-57 How to Cite?
AbstractThe rolling texture of Body Centered Cubic (BCC) low carbon and interstitial free (IF) steel consists of two crystallographic fibers, the α fiber («110»//RD) and the γ fiber ((«111»/ /ND). Cells, subgrains, and microbands, where these are not associated with significant lattice curvature, provide the driving forces for recrystallization. However, when these microstructures are associated with significant short range lattice curvature, as they are in deformation or shear bands, they can provide the nucleation sites. The process of recrystallization in IF steel is shown to occur in two stages: the first where the nuclei are contained in the original rolled-out grains belonging to the γ fiber, and where the essential lattice curvature is derived from shear and deformation bands. The second stage involves the impingement/coalescence of several recrystallized grains in the as-rolled envelope of an original hot band grain which provides a super-nucleation event, in which the as rolled boundaries bow out to give an equiaxed microstructure. An elegant proof is provided for this process, along with a simple model based on Strain Induced Boundary Migration (SIBM). The well-known optimal cold rolling, beyond which the drawability is known to degrade, is explained by deformation banding of a particular subset of the grains belonging to the α fiber. Finally, a novel experiment is described, based on the observed deformation banding behavior of crystals belonging to the γ fiber, which leads to very strong γ recrystallization textures, which are desirable in deep drawing. © Taylor & Francis Group, LLC.
Persistent Identifierhttp://hdl.handle.net/10722/133633
ISSN
2023 Impact Factor: 4.1
2023 SCImago Journal Rankings: 1.058
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorDuggan, BJen_HK
dc.contributor.authorTse, YYen_HK
dc.contributor.authorLam, Gen_HK
dc.contributor.authorQuadir, MZen_HK
dc.date.accessioned2011-05-24T02:12:30Z-
dc.date.available2011-05-24T02:12:30Z-
dc.date.issued2011en_HK
dc.identifier.citationMaterials And Manufacturing Processes, 2011, v. 26 n. 1, p. 51-57en_HK
dc.identifier.issn1042-6914en_HK
dc.identifier.urihttp://hdl.handle.net/10722/133633-
dc.description.abstractThe rolling texture of Body Centered Cubic (BCC) low carbon and interstitial free (IF) steel consists of two crystallographic fibers, the α fiber («110»//RD) and the γ fiber ((«111»/ /ND). Cells, subgrains, and microbands, where these are not associated with significant lattice curvature, provide the driving forces for recrystallization. However, when these microstructures are associated with significant short range lattice curvature, as they are in deformation or shear bands, they can provide the nucleation sites. The process of recrystallization in IF steel is shown to occur in two stages: the first where the nuclei are contained in the original rolled-out grains belonging to the γ fiber, and where the essential lattice curvature is derived from shear and deformation bands. The second stage involves the impingement/coalescence of several recrystallized grains in the as-rolled envelope of an original hot band grain which provides a super-nucleation event, in which the as rolled boundaries bow out to give an equiaxed microstructure. An elegant proof is provided for this process, along with a simple model based on Strain Induced Boundary Migration (SIBM). The well-known optimal cold rolling, beyond which the drawability is known to degrade, is explained by deformation banding of a particular subset of the grains belonging to the α fiber. Finally, a novel experiment is described, based on the observed deformation banding behavior of crystals belonging to the γ fiber, which leads to very strong γ recrystallization textures, which are desirable in deep drawing. © Taylor & Francis Group, LLC.en_HK
dc.languageengen_US
dc.publisherTaylor & Francis Inc. The Journal's web site is located at http://www.tandf.co.uk/journals/titles/1042-6914.aspen_HK
dc.relation.ispartofMaterials and Manufacturing Processesen_HK
dc.subjectDeformationen_HK
dc.subjectIF steelen_HK
dc.subjectRecrystallizationen_HK
dc.subjectSIBM modelen_HK
dc.subjectTextureen_HK
dc.titleDeformation and recrystallization of interstitial free (IF) steelen_HK
dc.typeArticleen_HK
dc.identifier.openurlhttp://library.hku.hk:4550/resserv?sid=HKU:IR&issn=1042-6914&volume=26&issue=1&spage=51&epage=57&date=2011&atitle=Deformation+and+recrystallization+of+interstitial+free+(IF)+steel-
dc.identifier.emailDuggan, BJ: bjduggan@hkucc.hku.hken_HK
dc.identifier.authorityDuggan, BJ=rp01686en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1080/10426910903202237en_HK
dc.identifier.scopuseid_2-s2.0-79952652632en_HK
dc.identifier.hkuros185418en_US
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-79952652632&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume26en_HK
dc.identifier.issue1en_HK
dc.identifier.spage51en_HK
dc.identifier.epage57en_HK
dc.identifier.isiWOS:000288268400008-
dc.publisher.placeUnited Statesen_HK
dc.identifier.scopusauthoridDuggan, BJ=7005772998en_HK
dc.identifier.scopusauthoridTse, YY=7005116855en_HK
dc.identifier.scopusauthoridLam, G=37063519700en_HK
dc.identifier.scopusauthoridQuadir, MZ=6603710687en_HK
dc.identifier.citeulike8997045-
dc.identifier.issnl1042-6914-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats