Effect of particle grading on the response of an idealized granular assemblage

Abstract

The effects of particle-size distribution on a granular assemblage's mechanical response were studied through a series of numerical triaxial tests using the three-dimensional (3D) discrete-element method. An assemblage was formed by spherical particles of various sizes. A simple linear contact model was adopted with the crucial consideration of varying contact stiffness with particle diameter. Numerical triaxial tests were mimicked by imposing axial compression under constant lateral pressure and constant volume condition, respectively. It was found that an assemblage with a wider particle grading gives more contractive response and behaves toward strain hardening upon shearing. Its critical state locates at a lower position in a void ratio versus mean normal stress plot. Nevertheless, no obvious difference in the critical stress ratio was shown. Model constants in a simple but efficient phenomenologically based granular material model within the framework of critical-state soil mechanics were calibrated from the numerical test results. Results show that some model constants exhibit linear variation with the coefficient of uniformity whereas others are almost independent of particle grading. This investigation provides an opportunity to better understand the implications and meanings of model constants in a phenomenologically based model from the microscale perspective. © 2011 American Society of Civil Engineers.