File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Tests of single shear bolted connections of thin sheet steels at elevated temperatures - part I: steady state tests

TitleTests of single shear bolted connections of thin sheet steels at elevated temperatures - part I: steady state tests
Authors
KeywordsBolted connections
High temperature
Material properties
Steady state test
Thin sheet
Issue Date2011
PublisherPergamon. The Journal's web site is located at http://www.elsevier.com/locate/tws
Citation
Thin-walled Structures, 2011, v. 49 n. 10, p. 1320-1333 How to Cite?
AbstractThe current design rules on bolted connections of thin sheet steels for cold-formed steel structures are applicable for ambient temperature condition only. Investigation of single shear bolted connections at elevated temperatures is limited. In this study, 120 single shear bolted connection specimens involving three different thicknesses of thin sheet steels and 30 coupon specimens were conducted by using steady state test method in the temperature range from 22 to 900 °C. There are three main failure modes observed in the single shear bolted connection tests, namely the net section tension, bearing, and tear out. The test results were compared with the predicted values calculated from the American, Australian/New Zealand and European specifications for cold-formed steel structures. In calculating the nominal strengths of the connections, the reduced material properties were used due to the deterioration of material at elevated temperatures. It is shown that the strengths of the single shear bolted connections predicted by the specifications are generally conservative at elevated temperatures. The comparison between the deterioration of the tested connection strengths and that of the material properties at elevated temperatures showed a similar tendency of reduction. © 2011 Elsevier Ltd. All rights reserved.
Persistent Identifierhttp://hdl.handle.net/10722/150581
ISSN
2023 Impact Factor: 5.7
2023 SCImago Journal Rankings: 1.527
ISI Accession Number ID
Funding AgencyGrant Number
University of Hong Kong
Funding Information:

The authors are grateful to BlueScope Lysaght (Singapore) Pte Ltd for providing the thin sheet steels. The research work described in this paper was supported by a grant from The University of Hong Kong under the seed funding program for basic research.

References

 

DC FieldValueLanguage
dc.contributor.authorYan, Sen_US
dc.contributor.authorYoung, Ben_US
dc.date.accessioned2012-06-26T06:05:54Z-
dc.date.available2012-06-26T06:05:54Z-
dc.date.issued2011en_US
dc.identifier.citationThin-walled Structures, 2011, v. 49 n. 10, p. 1320-1333en_US
dc.identifier.issn0263-8231en_US
dc.identifier.urihttp://hdl.handle.net/10722/150581-
dc.description.abstractThe current design rules on bolted connections of thin sheet steels for cold-formed steel structures are applicable for ambient temperature condition only. Investigation of single shear bolted connections at elevated temperatures is limited. In this study, 120 single shear bolted connection specimens involving three different thicknesses of thin sheet steels and 30 coupon specimens were conducted by using steady state test method in the temperature range from 22 to 900 °C. There are three main failure modes observed in the single shear bolted connection tests, namely the net section tension, bearing, and tear out. The test results were compared with the predicted values calculated from the American, Australian/New Zealand and European specifications for cold-formed steel structures. In calculating the nominal strengths of the connections, the reduced material properties were used due to the deterioration of material at elevated temperatures. It is shown that the strengths of the single shear bolted connections predicted by the specifications are generally conservative at elevated temperatures. The comparison between the deterioration of the tested connection strengths and that of the material properties at elevated temperatures showed a similar tendency of reduction. © 2011 Elsevier Ltd. All rights reserved.en_US
dc.languageengen_US
dc.publisherPergamon. The Journal's web site is located at http://www.elsevier.com/locate/twsen_US
dc.relation.ispartofThin-walled Structuresen_US
dc.subjectBolted connectionsen_US
dc.subjectHigh temperatureen_US
dc.subjectMaterial propertiesen_US
dc.subjectSteady state testen_US
dc.subjectThin sheeten_US
dc.titleTests of single shear bolted connections of thin sheet steels at elevated temperatures - part I: steady state testsen_US
dc.typeArticleen_US
dc.identifier.emailYoung, B: young@hku.hken_US
dc.identifier.authorityYoung, B=rp00208en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.doi10.1016/j.tws.2011.05.013en_US
dc.identifier.scopuseid_2-s2.0-79960914938en_US
dc.identifier.hkuros209532-
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-79960914938&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume49en_US
dc.identifier.issue10en_US
dc.identifier.spage1320en_US
dc.identifier.epage1333en_US
dc.identifier.isiWOS:000294573600014-
dc.publisher.placeUnited Kingdomen_US
dc.identifier.scopusauthoridYoung, B=7402192398en_US
dc.identifier.scopusauthoridYan, S=37016814300en_US
dc.identifier.citeulike9528268-
dc.identifier.issnl0263-8231-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats