File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Screwed connections of thin sheet steels at elevated temperatures - part II: transient state tests

TitleScrewed connections of thin sheet steels at elevated temperatures - part II: transient state tests
Authors
KeywordsElevated temperature
Screwed connections
Thin sheet
Transient state test
Ultimate strength
Issue Date2012
PublisherPergamon. The Journal's web site is located at http://www.elsevier.com/locate/engstruct
Citation
Engineering Structures, 2012, v. 35, p. 228-233 How to Cite?
AbstractThe design rules of single shear screwed connections in the current North American, Australian/New Zealand and European specifications for cold-formed steel structures are based on investigation at ambient temperature. A total of 54 single shear screwed connection specimens were tested at three different load levels using transient state test method. Three thicknesses of sheet steels were used to fabricate the screwed connections. The critical temperature and the corresponding displacement of screwed connections were obtained from the transient state test curves. The test strengths obtained from the transient state tests are similar to those obtained from the steady state tests. The failure modes such as tilting and bearing, screw shear, bearing, and teat out failure were observed in the transient tests. It is found that the failure modes of the screwed connections tested at the lowest load level are generally consistent with those failure modes observed in the steady state tests, and the failure mode may change as the load level increases. © 2011 Elsevier Ltd.
Persistent Identifierhttp://hdl.handle.net/10722/150641
ISSN
2023 Impact Factor: 5.6
2023 SCImago Journal Rankings: 1.661
ISI Accession Number ID
Funding AgencyGrant Number
University of Hong Kong
Funding Information:

The authors are grateful to BlueScope Lysaght (Singapore) Pte Ltd. for providing the thin sheet steels. The research work described in this paper was supported by a grant from The University of Hong Kong under the seed funding program for basic research.

References

 

DC FieldValueLanguage
dc.contributor.authorYan, Sen_US
dc.contributor.authorYoung, Ben_US
dc.date.accessioned2012-06-26T06:06:22Z-
dc.date.available2012-06-26T06:06:22Z-
dc.date.issued2012en_US
dc.identifier.citationEngineering Structures, 2012, v. 35, p. 228-233en_US
dc.identifier.issn0141-0296en_US
dc.identifier.urihttp://hdl.handle.net/10722/150641-
dc.description.abstractThe design rules of single shear screwed connections in the current North American, Australian/New Zealand and European specifications for cold-formed steel structures are based on investigation at ambient temperature. A total of 54 single shear screwed connection specimens were tested at three different load levels using transient state test method. Three thicknesses of sheet steels were used to fabricate the screwed connections. The critical temperature and the corresponding displacement of screwed connections were obtained from the transient state test curves. The test strengths obtained from the transient state tests are similar to those obtained from the steady state tests. The failure modes such as tilting and bearing, screw shear, bearing, and teat out failure were observed in the transient tests. It is found that the failure modes of the screwed connections tested at the lowest load level are generally consistent with those failure modes observed in the steady state tests, and the failure mode may change as the load level increases. © 2011 Elsevier Ltd.en_US
dc.languageengen_US
dc.publisherPergamon. The Journal's web site is located at http://www.elsevier.com/locate/engstructen_US
dc.relation.ispartofEngineering Structuresen_US
dc.subjectElevated temperatureen_US
dc.subjectScrewed connectionsen_US
dc.subjectThin sheeten_US
dc.subjectTransient state testen_US
dc.subjectUltimate strengthen_US
dc.titleScrewed connections of thin sheet steels at elevated temperatures - part II: transient state testsen_US
dc.typeArticleen_US
dc.identifier.emailYoung, B: young@hku.hken_US
dc.identifier.authorityYoung, B=rp00208en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.doi10.1016/j.engstruct.2011.10.027en_US
dc.identifier.scopuseid_2-s2.0-84855465410en_US
dc.identifier.hkuros209545-
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-84855465410&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume35en_US
dc.identifier.spage228en_US
dc.identifier.epage233en_US
dc.identifier.isiWOS:000301217300022-
dc.publisher.placeUnited Kingdomen_US
dc.identifier.scopusauthoridYoung, B=7402192398en_US
dc.identifier.scopusauthoridYan, S=37016814300en_US
dc.identifier.citeulike10234585-
dc.identifier.issnl0141-0296-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats