File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Acrylic resins reinforced with woven highly drawn linear polyethylene fibres. 3. Mechanical properties and further aspects of denture construction.

TitleAcrylic resins reinforced with woven highly drawn linear polyethylene fibres. 3. Mechanical properties and further aspects of denture construction.
Authors
KeywordsAcrylic resins
dental materials
polyethylene fibres
Issue Date1993
PublisherWiley-Blackwell Publishing Ltd.. The Journal's web site is located at http://www.wiley.com/bw/journal.asp?ref=0045-0421
Citation
Australian Dental Journal, 1993, v. 38 n. 1, p. 28-38 How to Cite?
AbstractPrevious work has established the feasibility of producing acrylic denture bases reinforced with layers of highly drawn linear polyethylene fibres in a woven form. This paper reports on the mechanical properties of the system, including the effect of water conditioning. It is confirmed that substantial improvements in impact strength can be obtained by the incorporation of the polyethylene fibres in woven form. The fibre/resin integration within the dentures has also been studied by optical microscopy. It was found that delamination may occur during some processing stages and steps are suggested to avoid this problem.
Persistent Identifierhttp://hdl.handle.net/10722/153823
ISSN
2023 Impact Factor: 1.9
2023 SCImago Journal Rankings: 0.597
ISI Accession Number ID

 

DC FieldValueLanguage
dc.contributor.authorLadizesky, NHen_US
dc.contributor.authorPang, MKen_US
dc.contributor.authorChow, TWen_US
dc.contributor.authorWard, IMen_US
dc.date.accessioned2012-08-08T08:21:46Z-
dc.date.available2012-08-08T08:21:46Z-
dc.date.issued1993en_US
dc.identifier.citationAustralian Dental Journal, 1993, v. 38 n. 1, p. 28-38en_US
dc.identifier.issn0045-0421en_US
dc.identifier.urihttp://hdl.handle.net/10722/153823-
dc.description.abstractPrevious work has established the feasibility of producing acrylic denture bases reinforced with layers of highly drawn linear polyethylene fibres in a woven form. This paper reports on the mechanical properties of the system, including the effect of water conditioning. It is confirmed that substantial improvements in impact strength can be obtained by the incorporation of the polyethylene fibres in woven form. The fibre/resin integration within the dentures has also been studied by optical microscopy. It was found that delamination may occur during some processing stages and steps are suggested to avoid this problem.en_US
dc.languageengen_US
dc.publisherWiley-Blackwell Publishing Ltd.. The Journal's web site is located at http://www.wiley.com/bw/journal.asp?ref=0045-0421en_US
dc.relation.ispartofAustralian Dental Journalen_US
dc.subjectAcrylic resins-
dc.subjectdental materials-
dc.subjectpolyethylene fibres-
dc.subject.meshAcrylic Resins - Chemistryen_US
dc.subject.meshChemistry, Physicalen_US
dc.subject.meshDenture Basesen_US
dc.subject.meshDenture Designen_US
dc.subject.meshElasticityen_US
dc.subject.meshMaterials Testingen_US
dc.subject.meshMethylmethacrylates - Chemistryen_US
dc.subject.meshPhysicochemical Phenomenaen_US
dc.subject.meshPolyethylenes - Chemistryen_US
dc.subject.meshStress, Mechanicalen_US
dc.subject.meshSurface Propertiesen_US
dc.subject.meshTensile Strengthen_US
dc.subject.meshWateren_US
dc.titleAcrylic resins reinforced with woven highly drawn linear polyethylene fibres. 3. Mechanical properties and further aspects of denture construction.en_US
dc.typeArticleen_US
dc.identifier.emailChow, TW:twchow@hku.hken_US
dc.identifier.authorityChow, TW=rp00009en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.doi10.1111/j.1834-7819.1993.tb05448.x-
dc.identifier.pmid8447769-
dc.identifier.scopuseid_2-s2.0-0027549608en_US
dc.identifier.volume38en_US
dc.identifier.issue1en_US
dc.identifier.spage28en_US
dc.identifier.epage38en_US
dc.identifier.isiWOS:A1993KQ55200005-
dc.publisher.placeUnited Kingdomen_US
dc.identifier.scopusauthoridLadizesky, NH=7003363827en_US
dc.identifier.scopusauthoridPang, MK=7102068634en_US
dc.identifier.scopusauthoridChow, TW=7203012369en_US
dc.identifier.scopusauthoridWard, IM=7202055954en_US
dc.identifier.issnl0045-0421-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats