File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: The effect of a 3-methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane blend and tris(3-trimethoxysilylpropyl)isocyanurate on the shear bond strength of composite resin to titanium metal

TitleThe effect of a 3-methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane blend and tris(3-trimethoxysilylpropyl)isocyanurate on the shear bond strength of composite resin to titanium metal
Authors
KeywordsAdhesion
Dental materials
Fourier transformation infrared spectroscopy
Silane
Titanium
Issue Date2004
PublisherElsevier Inc. The Journal's web site is located at http://www.elsevier.com/locate/dental
Citation
Dental Materials, 2004, v. 20 n. 9, p. 804-813 How to Cite?
AbstractObjectives. The aim of this study was to evaluate the reactions of silanes prior to attaching the composite to titanium and evaluate these silanes as coupling agents. Veneered titanium may be used as a prosthetic material. Methods. Two silane solutions, a mixture of both γ- methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane, and tris(3-trimethoxysilylpropyl)isocyanurate were prepared as 2wt% in two different (95% 2-propanol and 90% acetone) solutions. A control, 2wt% γ-methacryloxypropyltrimethoxysilane was prepared in both solutions. These six silane solutions were applied onto flat titanium surfaces. The samples (N=250) were divided into two main groups: air-dried (room temperature) and heat cured for 1 h at 110 °C. Sinfony® veneering composite was applied and light-cured on the titanium. The control group was non-silanized. The specimens were assigned to two subgroups: not thermocycled, and thermocycled (5000 cycles, 5-55 °C). Shear bond strength of the composite was tested at a crosshead speed of 1.0 mm min-1. Fresh silane solution hydrolysis, and condensation reaction on titanium surface were monitored by FTIR spectrometry. Results. Dry samples could be successfully tested, while thermocycling after 3700 cycles had gradually de-bonded the composite from the silanized titanium substrate. For dry samples, statistical analysis (ANOVA) showed that solvent and silane significantly affected the shear bond strength. The silane mixture in 2-propanol reacted at room temperature yielded 11.3 MPa (Standard deviation, SD, 3.6 MPa) and on the other hand, tris(3- trimethoxysilylpropyl)isocyanurate in 2-propanol yielded 10.7 MPa (SD 8.0 MPa) and γ-methacryloxypropyltrimethoxysilane 20.4 MPa (SD 12.2 MPa). Non-silanized samples yielded 4.8 MPa (SD 2.1 MPa). Significance. In all solvents used, silanes reacted chemically with the titanium surface and covalent Si-O-Ti- and -Si-O-Si- bonds were evident. © 2003 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.
Persistent Identifierhttp://hdl.handle.net/10722/154530
ISSN
2023 Impact Factor: 4.6
2023 SCImago Journal Rankings: 1.186
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorMatinlinna, JPen_US
dc.contributor.authorÖzcan, Men_US
dc.contributor.authorLassila, LVJen_US
dc.contributor.authorVallittu, PKen_US
dc.date.accessioned2012-08-08T08:26:01Z-
dc.date.available2012-08-08T08:26:01Z-
dc.date.issued2004en_US
dc.identifier.citationDental Materials, 2004, v. 20 n. 9, p. 804-813en_US
dc.identifier.issn0109-5641en_US
dc.identifier.urihttp://hdl.handle.net/10722/154530-
dc.description.abstractObjectives. The aim of this study was to evaluate the reactions of silanes prior to attaching the composite to titanium and evaluate these silanes as coupling agents. Veneered titanium may be used as a prosthetic material. Methods. Two silane solutions, a mixture of both γ- methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane, and tris(3-trimethoxysilylpropyl)isocyanurate were prepared as 2wt% in two different (95% 2-propanol and 90% acetone) solutions. A control, 2wt% γ-methacryloxypropyltrimethoxysilane was prepared in both solutions. These six silane solutions were applied onto flat titanium surfaces. The samples (N=250) were divided into two main groups: air-dried (room temperature) and heat cured for 1 h at 110 °C. Sinfony® veneering composite was applied and light-cured on the titanium. The control group was non-silanized. The specimens were assigned to two subgroups: not thermocycled, and thermocycled (5000 cycles, 5-55 °C). Shear bond strength of the composite was tested at a crosshead speed of 1.0 mm min-1. Fresh silane solution hydrolysis, and condensation reaction on titanium surface were monitored by FTIR spectrometry. Results. Dry samples could be successfully tested, while thermocycling after 3700 cycles had gradually de-bonded the composite from the silanized titanium substrate. For dry samples, statistical analysis (ANOVA) showed that solvent and silane significantly affected the shear bond strength. The silane mixture in 2-propanol reacted at room temperature yielded 11.3 MPa (Standard deviation, SD, 3.6 MPa) and on the other hand, tris(3- trimethoxysilylpropyl)isocyanurate in 2-propanol yielded 10.7 MPa (SD 8.0 MPa) and γ-methacryloxypropyltrimethoxysilane 20.4 MPa (SD 12.2 MPa). Non-silanized samples yielded 4.8 MPa (SD 2.1 MPa). Significance. In all solvents used, silanes reacted chemically with the titanium surface and covalent Si-O-Ti- and -Si-O-Si- bonds were evident. © 2003 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.en_US
dc.languageengen_US
dc.publisherElsevier Inc. The Journal's web site is located at http://www.elsevier.com/locate/dentalen_US
dc.relation.ispartofDental Materialsen_US
dc.subjectAdhesion-
dc.subjectDental materials-
dc.subjectFourier transformation infrared spectroscopy-
dc.subjectSilane-
dc.subjectTitanium-
dc.subject.meshAnalysis Of Varianceen_US
dc.subject.meshComposite Resinsen_US
dc.subject.meshDental Bondingen_US
dc.subject.meshDental Stress Analysisen_US
dc.subject.meshDental Veneersen_US
dc.subject.meshMaterials Testingen_US
dc.subject.meshMethacrylates - Chemistryen_US
dc.subject.meshMolecular Structureen_US
dc.subject.meshShear Strengthen_US
dc.subject.meshSilanes - Chemistryen_US
dc.subject.meshSpectroscopy, Fourier Transform Infrareden_US
dc.subject.meshTitaniumen_US
dc.subject.meshTriazines - Chemistryen_US
dc.subject.meshVinyl Compounds - Chemistryen_US
dc.titleThe effect of a 3-methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane blend and tris(3-trimethoxysilylpropyl)isocyanurate on the shear bond strength of composite resin to titanium metalen_US
dc.typeArticleen_US
dc.identifier.emailMatinlinna, JP:jpmat@hku.hken_US
dc.identifier.authorityMatinlinna, JP=rp00052en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.doi10.1016/j.dental.2003.10.009en_US
dc.identifier.pmid15451235-
dc.identifier.scopuseid_2-s2.0-4644275580en_US
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-4644275580&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume20en_US
dc.identifier.issue9en_US
dc.identifier.spage804en_US
dc.identifier.epage813en_US
dc.identifier.isiWOS:000224374100003-
dc.publisher.placeUnited Statesen_US
dc.identifier.scopusauthoridMatinlinna, JP=6602419428en_US
dc.identifier.scopusauthoridÖzcan, M=7102067681en_US
dc.identifier.scopusauthoridLassila, LVJ=6603761779en_US
dc.identifier.scopusauthoridVallittu, PK=7006138548en_US
dc.identifier.issnl0109-5641-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats