File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Spin-spray ferrite-plated co ferrite films with high coercivity for perpendicular magnetic recording media

TitleSpin-spray ferrite-plated co ferrite films with high coercivity for perpendicular magnetic recording media
Authors
Zhang, FKantake, SKitamoto, YAbe, M
KeywordsCo Ferrite Films
Ferrite Plating
Perpendicular Magnetic Recording Media
Issue Date1999
PublisherI E E E. The Journal's web site is located at http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=20
Citation
Ieee Transactions On Magnetics, 1999, v. 35 n. 5 PART 1, p. 2751-2753 How to Cite?
DOI: http://dx.doi.org/10.1109/20.800974
AbstractEffects of plating conditions on Co ferrite-plated films for perpendicular magnetic recording media were investigated to increase coercivity H c⊥ and remanence ratio (M r/M s) ⊥ in the plane perpendicular to the film. By optimizing a concentration of NaNO 2 in an oxidizing solution and the deposition rate, Co-Ni ferrite films with H c⊥ of 3200 Oe and (M r/M s) ⊥ of 0.6 were obtained without any heat-treatment. Disk media with higher H c⊥ and (M r/M s) ⊥ exhibited reproduced waveforms of di-pluses shape and better frequency responses than that with lower H c⊥ and (M r/M s) ⊥. Media noise did not increase with increasing frequency, suggesting that the transition noise was low. © 1999 IEEE.
Persistent Identifierhttp://hdl.handle.net/10722/174783
ISSN
0018-9464
2023 Impact Factor: 2.1
2023 SCImago Journal Rankings: 0.729
ISI Accession Number ID
WOS:000083151100172
References
References in Scopus

 

DC FieldValueLanguage
dc.contributor.authorZhang, Fen_US
dc.contributor.authorKantake, Sen_US
dc.contributor.authorKitamoto, Yen_US
dc.contributor.authorAbe, Men_US
dc.date.accessioned2012-11-26T08:47:25Z-
dc.date.available2012-11-26T08:47:25Z-
dc.date.issued1999en_US
dc.identifier.citationIeee Transactions On Magnetics, 1999, v. 35 n. 5 PART 1, p. 2751-2753en_US
dc.identifier.issn0018-9464en_US
dc.identifier.urihttp://hdl.handle.net/10722/174783-
dc.description.abstractEffects of plating conditions on Co ferrite-plated films for perpendicular magnetic recording media were investigated to increase coercivity H c⊥ and remanence ratio (M r/M s) ⊥ in the plane perpendicular to the film. By optimizing a concentration of NaNO 2 in an oxidizing solution and the deposition rate, Co-Ni ferrite films with H c⊥ of 3200 Oe and (M r/M s) ⊥ of 0.6 were obtained without any heat-treatment. Disk media with higher H c⊥ and (M r/M s) ⊥ exhibited reproduced waveforms of di-pluses shape and better frequency responses than that with lower H c⊥ and (M r/M s) ⊥. Media noise did not increase with increasing frequency, suggesting that the transition noise was low. © 1999 IEEE.en_US
dc.languageengen_US
dc.publisherI E E E. The Journal's web site is located at http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=20en_US
dc.relation.ispartofIEEE Transactions on Magneticsen_US
dc.subjectCo Ferrite Filmsen_US
dc.subjectFerrite Platingen_US
dc.subjectPerpendicular Magnetic Recording Mediaen_US
dc.titleSpin-spray ferrite-plated co ferrite films with high coercivity for perpendicular magnetic recording mediaen_US
dc.typeArticleen_US
dc.identifier.emailZhang, F: fuchun@hkucc.hku.hken_US
dc.identifier.authorityZhang, F=rp00840en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.doi10.1109/20.800974en_US
dc.identifier.scopuseid_2-s2.0-0033184353en_US
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-0033184353&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume35en_US
dc.identifier.issue5 PART 1en_US
dc.identifier.spage2751en_US
dc.identifier.epage2753en_US
dc.identifier.isiWOS:000083151100172-
dc.publisher.placeUnited Statesen_US
dc.identifier.scopusauthoridZhang, F=14012468800en_US
dc.identifier.scopusauthoridKantake, S=7801632320en_US
dc.identifier.scopusauthoridKitamoto, Y=7006209500en_US
dc.identifier.scopusauthoridAbe, M=35399559100en_US
dc.identifier.issnl0018-9464-

Export via OAI-PMH Interface in XML Formats

OR

Export to Other Non-XML Formats