File Download
Supplementary

Conference Paper: Comparison of three coating methods for resin zirconia bonding

TitleComparison of three coating methods for resin zirconia bonding
Authors
Liu, DMatinlinna, JPPow, EHNTsoi, JKH
KeywordsAdhesion
Composites
Dental materials
Zirconia
Issue Date2013
PublisherInternational Association for Dental Research (IDAR).
Citation
The 46th Annual Meeting of the Continental European Division of the International Association for Dental Research (CED-IADR) with Scandinavian Division (NOF), Florence, Italy, 4-7 September 2013. How to Cite?
AbstractOBJECTIVE: To contrast and compare the effects of three surface coatings on the bond strength between zirconia and resin-cement. METHOD: 32 pre-sintered zirconia discs (25 mm diameter, 1.5 mm thickness) were sectioned from zirconia blocks and polished under running water. All the samples were randomly divided into four experimental groups and treated as follows: control group (fully sintered, no treatment), group S (fully sintered and sandblasted with silica-coated alumina powders), group G (fully sintered + glazing porcelain veneering + HF etching), group Si (coated with silica and fully sintered). After being ultrasonically cleans...
DescriptionPoster Session - 24 Dental Materials - Zirconia and Porcelain: no. 317
Persistent Identifierhttp://hdl.handle.net/10722/193260

 

DC FieldValueLanguage
dc.contributor.authorLiu, Den_US
dc.contributor.authorMatinlinna, JPen_US
dc.contributor.authorPow, EHNen_US
dc.contributor.authorTsoi, JKHen_US
dc.date.accessioned2013-12-20T02:41:05Z-
dc.date.available2013-12-20T02:41:05Z-
dc.date.issued2013en_US
dc.identifier.citationThe 46th Annual Meeting of the Continental European Division of the International Association for Dental Research (CED-IADR) with Scandinavian Division (NOF), Florence, Italy, 4-7 September 2013.en_US
dc.identifier.urihttp://hdl.handle.net/10722/193260-
dc.descriptionPoster Session - 24 Dental Materials - Zirconia and Porcelain: no. 317-
dc.description.abstractOBJECTIVE: To contrast and compare the effects of three surface coatings on the bond strength between zirconia and resin-cement. METHOD: 32 pre-sintered zirconia discs (25 mm diameter, 1.5 mm thickness) were sectioned from zirconia blocks and polished under running water. All the samples were randomly divided into four experimental groups and treated as follows: control group (fully sintered, no treatment), group S (fully sintered and sandblasted with silica-coated alumina powders), group G (fully sintered + glazing porcelain veneering + HF etching), group Si (coated with silica and fully sintered). After being ultrasonically cleans...-
dc.languageengen_US
dc.publisherInternational Association for Dental Research (IDAR).-
dc.relation.ispartofCED-IADR Florence 2013en_US
dc.subjectAdhesion-
dc.subjectComposites-
dc.subjectDental materials-
dc.subjectZirconia-
dc.titleComparison of three coating methods for resin zirconia bondingen_US
dc.typeConference_Paperen_US
dc.identifier.emailMatinlinna, JP: jpmat@hku.hken_US
dc.identifier.emailPow, EHN: ehnpow@hku.hken_US
dc.identifier.emailTsoi, JKH: jkhtsoi@hku.hken_US
dc.identifier.authorityMatinlinna, JP=rp00052en_US
dc.identifier.authorityPow, EHN=rp00030en_US
dc.identifier.authorityTsoi, JKH=rp01609en_US
dc.description.naturelink_to_OA_fulltext-
dc.identifier.hkuros227017en_US
dc.publisher.placeUnited States-

Export via OAI-PMH Interface in XML Formats

OR

Export to Other Non-XML Formats