Aspects of charge generation on Ti surface using a triboelectric approach

Abstract

Titanium and its alloys have been widely used as materials in biomedicine and in particular, for dental implants, and one main reason is their unique ability to osseointegrate with the host bone. This phenomenon forms a strong bone-to-implant bonding. The rate and quality of osseointegration of a titanium dental implant depends heavily upon its surface properties. Over time, various surface treatment methods have been developed to further improve osseointegration of titanium-based biomaterials. This PhD thesis focuses on promising surface treatment methodology: surface charge modification. A negative charge has been known to promote the osseointegration of titanium biomaterials. Before the current work there was no practical approach to induce negative charge on titanium surfaces. The goal was to find such a practical technique. The current investigations revealed that sandblasting, a commonly used surface treatment method, can generate a negative charge on the surface of titanium, and also titanium alloy and stainless steel micro-implants, due to the triboelectric effect. Stainless steel doesn’t osseointegrate.

The basic methodology of these studies was to sandblast titanium and measure the amount and polarity of the static charge on titanium surfaces. The effects of several important parameters were evaluated, including the sandblasting material, the size of the blasting grits, and the shape of the titanium material. Statistical analysis was performed on the results of the static charge measurements. In addition, the contamination of the titanium sandblasting was also evaluated.

The results of the current studies suggested that sandblasting could generate static charges on titanium and stainless steel surfaces. However, such charges gradually dissipate into the atmosphere. The amount, polarity, and the decay rate of the charge depend on many factors tested in the experiments. These results might explain the beneficial of sandblasting on the osseointegration of titanium implants. Osseointegration has been traditionally attributed to its roughening effects. Moreover, the current studies may potentially lead to improved sandblasting techniques, becoming in mind that more research should be carried out.