File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Influence of modification method and transition metal type on the physicochemical properties of MCM-41 catalysts and their performances in the catalytic ozonation of toluene

TitleInfluence of modification method and transition metal type on the physicochemical properties of MCM-41 catalysts and their performances in the catalytic ozonation of toluene
Authors
KeywordsToluene
Ozone
MCM-41
Catalytic oxidation
Transition metal
Issue Date2011
Citation
Applied Catalysis B: Environmental, 2011, v. 107, n. 3-4, p. 245-252 How to Cite?
AbstractThe current study describes the catalytic ozonation of toluene using MCM-41 catalysts modified by different transition metals (Cu and Co) and methods (in situ synthesis and impregnation). The characteristic hexagonal channel array of the MCM-41 pore system was not destroyed by the transition metal modification, but the order and surface area were decreased. Large particles of copper oxide exposed on the (1. 1. 1) lattice plane, which were indicative of severe sintering, were found on the catalyst modified by Cu via in situ synthesis. Such particles were not observed on the other catalysts. Using the modified catalysts in toluene ozonation revealed that with increased reaction temperature, toluene conversion under a steady state increased, whereas ozone conversion decreased. The transition metal-modified MCM-41s also had largely improved catalytic activities compared with pure MCM-41. Catalytic performance was found to depend on the metal type and modification method. The method that resulted in improved catalytic performance was in situ synthesis for the Co-modified MCM-41, and was impregnation for the Cu-modified MCM-41. The relatively superior performance of the transition metal-modified catalysts over pure MCM-41 is attributed to two main features. One is the well dispersion of metal oxides, and the other is the strong capacity to decompose built-up organic byproducts on the catalyst surface. © 2011 Elsevier B.V.
Persistent Identifierhttp://hdl.handle.net/10722/255903
ISSN
2023 Impact Factor: 20.2
2023 SCImago Journal Rankings: 5.112
ISI Accession Number ID

 

DC FieldValueLanguage
dc.contributor.authorLi, Maoshuai-
dc.contributor.authorHui, K. N.-
dc.contributor.authorHui, K. S.-
dc.contributor.authorLee, S. K.-
dc.contributor.authorCho, Y. R.-
dc.contributor.authorLee, Heesoo-
dc.contributor.authorZhou, W.-
dc.contributor.authorCho, Shinho-
dc.contributor.authorChao, C. Y.H.-
dc.contributor.authorLi, Yangyang-
dc.date.accessioned2018-07-16T06:14:01Z-
dc.date.available2018-07-16T06:14:01Z-
dc.date.issued2011-
dc.identifier.citationApplied Catalysis B: Environmental, 2011, v. 107, n. 3-4, p. 245-252-
dc.identifier.issn0926-3373-
dc.identifier.urihttp://hdl.handle.net/10722/255903-
dc.description.abstractThe current study describes the catalytic ozonation of toluene using MCM-41 catalysts modified by different transition metals (Cu and Co) and methods (in situ synthesis and impregnation). The characteristic hexagonal channel array of the MCM-41 pore system was not destroyed by the transition metal modification, but the order and surface area were decreased. Large particles of copper oxide exposed on the (1. 1. 1) lattice plane, which were indicative of severe sintering, were found on the catalyst modified by Cu via in situ synthesis. Such particles were not observed on the other catalysts. Using the modified catalysts in toluene ozonation revealed that with increased reaction temperature, toluene conversion under a steady state increased, whereas ozone conversion decreased. The transition metal-modified MCM-41s also had largely improved catalytic activities compared with pure MCM-41. Catalytic performance was found to depend on the metal type and modification method. The method that resulted in improved catalytic performance was in situ synthesis for the Co-modified MCM-41, and was impregnation for the Cu-modified MCM-41. The relatively superior performance of the transition metal-modified catalysts over pure MCM-41 is attributed to two main features. One is the well dispersion of metal oxides, and the other is the strong capacity to decompose built-up organic byproducts on the catalyst surface. © 2011 Elsevier B.V.-
dc.languageeng-
dc.relation.ispartofApplied Catalysis B: Environmental-
dc.subjectToluene-
dc.subjectOzone-
dc.subjectMCM-41-
dc.subjectCatalytic oxidation-
dc.subjectTransition metal-
dc.titleInfluence of modification method and transition metal type on the physicochemical properties of MCM-41 catalysts and their performances in the catalytic ozonation of toluene-
dc.typeArticle-
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1016/j.apcatb.2011.07.018-
dc.identifier.scopuseid_2-s2.0-80052293462-
dc.identifier.volume107-
dc.identifier.issue3-4-
dc.identifier.spage245-
dc.identifier.epage252-
dc.identifier.isiWOS:000295305500003-
dc.identifier.issnl0926-3373-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats