File Download
  Links for fulltext
     (May Require Subscription)
Supplementary

postgraduate thesis: Enhancing IEEE 802.11ah for the Internet of things

TitleEnhancing IEEE 802.11ah for the Internet of things
Authors
Advisors
Advisor(s):Yeung, LK
Issue Date2018
PublisherThe University of Hong Kong (Pokfulam, Hong Kong)
Citation
Zhang, X. [张昕]. (2018). Enhancing IEEE 802.11ah for the Internet of things. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR.
AbstractIEEE 802.11ah is a new wireless networking protocol published in 2017 to support the Internet of Things (IoT). The biggest challenge in IEEE 802.11ah is to deal with channel contention among thousands of low-power sensors. In this thesis, we focus on enhancing the performance of IEEE 802.11ah and five original contributions are made: an analytical model for studying RAW (restricted access window) slot assignments, a distributed AID (associate ID) shuffle mechanism for balancing traffic among RAW slots, a timer backoff mechanism for retrieving simultaneously triggered alarm-reports, an adaptive polling scheme to handle alarm-reports with large size, and an interleaved TWT (target wake time) grouping mechanism for scheduling periodic sensor traffic. To alleviate the channel contention among event-driven sensors, restricted access window (RAW) , or a time interval reserved for a specified group of sensors/stations (STAs), is introduced in IEEE 802.11ah. A RAW can be divided into slots to further reduce frame collisions. To assign STAs into slots/subgroups, round-robin assignment and random assignment can be used. To gain insight into their designs, an analytical model is first constructed to study and compare their performances. We show that round-robin assignment outperforms random assignment in most cases. But when the traffic is heterogeneous, round-robin assignment suffers from the uneven traffic loads among different RAW slots, causing transmission unfairness and hurting the system throughput. To address this issue, a distributed AID shuffle mechanism is proposed to enhance the performance of round-robin assignment. A special class of event-driven traffic is triggered by an alarm event such as a fire or an earthquake. Alarm-triggered traffic is time-critical, but large amount of concurrent transmissions from many sensors will cause massive frame collisions and excessive delay. To efficiently retrieve alarm-reports, a timer backoff mechanism called limited local extension (LLE) is designed to enhance the distributed coordination function (DCF). While LLE is efficient with small sized alarm-reports, its performance deteriorates with frame size. To address this issue, an adaptive polling scheme is then proposed such that an AP detects an alarm-reporting event based on channel status, and then uses RAWs to orderly retrieve alarm-reports. In addition to event-driven traffic, many sensors will report their status periodically. In 802.11ah, periodic traffic can be scheduled using target wake time (TWT) mechanism: a sensor only needs to wake up in evenly spaced service periods (SPs) for frame exchange. Since IEEE 802.11ah also supports human-operated devices (e.g. mobile-phones), AP needs to indicate periodic RAWs (PRAWs) to prevent them from accessing SPs reserved by sensors. This incurs significant indication overhead. To minimize the overhead, a side-by-side TWT grouping mechanism can be used to pack SPs from different sensors back-to-back to share a single PRAW. But the delay performance of human-operated devices suffer. To address this issue, a novel interleaved grouping is proposed and studied in this thesis.
DegreeDoctor of Philosophy
SubjectIEEE 802.11 (Standard)
Dept/ProgramElectrical and Electronic Engineering
Persistent Identifierhttp://hdl.handle.net/10722/265404

 

DC FieldValueLanguage
dc.contributor.advisorYeung, LK-
dc.contributor.authorZhang, Xin-
dc.contributor.author张昕-
dc.date.accessioned2018-11-29T06:22:35Z-
dc.date.available2018-11-29T06:22:35Z-
dc.date.issued2018-
dc.identifier.citationZhang, X. [张昕]. (2018). Enhancing IEEE 802.11ah for the Internet of things. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR.-
dc.identifier.urihttp://hdl.handle.net/10722/265404-
dc.description.abstractIEEE 802.11ah is a new wireless networking protocol published in 2017 to support the Internet of Things (IoT). The biggest challenge in IEEE 802.11ah is to deal with channel contention among thousands of low-power sensors. In this thesis, we focus on enhancing the performance of IEEE 802.11ah and five original contributions are made: an analytical model for studying RAW (restricted access window) slot assignments, a distributed AID (associate ID) shuffle mechanism for balancing traffic among RAW slots, a timer backoff mechanism for retrieving simultaneously triggered alarm-reports, an adaptive polling scheme to handle alarm-reports with large size, and an interleaved TWT (target wake time) grouping mechanism for scheduling periodic sensor traffic. To alleviate the channel contention among event-driven sensors, restricted access window (RAW) , or a time interval reserved for a specified group of sensors/stations (STAs), is introduced in IEEE 802.11ah. A RAW can be divided into slots to further reduce frame collisions. To assign STAs into slots/subgroups, round-robin assignment and random assignment can be used. To gain insight into their designs, an analytical model is first constructed to study and compare their performances. We show that round-robin assignment outperforms random assignment in most cases. But when the traffic is heterogeneous, round-robin assignment suffers from the uneven traffic loads among different RAW slots, causing transmission unfairness and hurting the system throughput. To address this issue, a distributed AID shuffle mechanism is proposed to enhance the performance of round-robin assignment. A special class of event-driven traffic is triggered by an alarm event such as a fire or an earthquake. Alarm-triggered traffic is time-critical, but large amount of concurrent transmissions from many sensors will cause massive frame collisions and excessive delay. To efficiently retrieve alarm-reports, a timer backoff mechanism called limited local extension (LLE) is designed to enhance the distributed coordination function (DCF). While LLE is efficient with small sized alarm-reports, its performance deteriorates with frame size. To address this issue, an adaptive polling scheme is then proposed such that an AP detects an alarm-reporting event based on channel status, and then uses RAWs to orderly retrieve alarm-reports. In addition to event-driven traffic, many sensors will report their status periodically. In 802.11ah, periodic traffic can be scheduled using target wake time (TWT) mechanism: a sensor only needs to wake up in evenly spaced service periods (SPs) for frame exchange. Since IEEE 802.11ah also supports human-operated devices (e.g. mobile-phones), AP needs to indicate periodic RAWs (PRAWs) to prevent them from accessing SPs reserved by sensors. This incurs significant indication overhead. To minimize the overhead, a side-by-side TWT grouping mechanism can be used to pack SPs from different sensors back-to-back to share a single PRAW. But the delay performance of human-operated devices suffer. To address this issue, a novel interleaved grouping is proposed and studied in this thesis.-
dc.languageeng-
dc.publisherThe University of Hong Kong (Pokfulam, Hong Kong)-
dc.relation.ispartofHKU Theses Online (HKUTO)-
dc.rightsThe author retains all proprietary rights, (such as patent rights) and the right to use in future works.-
dc.rightsThis work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.-
dc.subject.lcshIEEE 802.11 (Standard)-
dc.titleEnhancing IEEE 802.11ah for the Internet of things-
dc.typePG_Thesis-
dc.description.thesisnameDoctor of Philosophy-
dc.description.thesislevelDoctoral-
dc.description.thesisdisciplineElectrical and Electronic Engineering-
dc.description.naturepublished_or_final_version-
dc.identifier.doi10.5353/th_991044058176603414-
dc.date.hkucongregation2018-
dc.identifier.mmsid991044058176603414-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats