File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Research on effect of axial compression ratio on steel plate concrete composite shear walls

TitleResearch on effect of axial compression ratio on steel plate concrete composite shear walls
Authors
KeywordsAxial compression ratio
Bearing capacity
Elasto-plastic finite element analysis
Quasi-static test
Steel plate concrete composite shear wall
Issue Date2016
Citation
Jianzhu Jiegou Xuebao/Journal of Building Structures, 2016, v. 37, n. 7, p. 29-37 How to Cite?
AbstractAxial compression ratio is closely related to the seismic behavior of steel plate concrete composite shear walls(SPCW). Effects of axial compression ratio on the lateral stiffness, hysteretic behavior, energy dissipation capacity, ductility and bearing capacity of SPCW were analyzed by elasto-plastic finite element software. The results show that SPCW normal section bearing capacity changes along with axial compression ratio and reaches the maximum when the axial compression ratio is 0.4. SPCW has the maximum ductility and energy dissipation capacity when the axial compression ratio is in the range of 0.2 to 0.4. The deformation capacity, ductility and energy dissipation capacity decrease if the axial compression ratio exceeds 0.6. Meanwhile, axial compression ratio influences the initial lateral stiffness of SPCW. Lateral stiffness decreases with the cycles of reversed loading. To verify the reliability of the finite element analysis, a scaled compression-bending SPCW specimen test was carried out. The finite element analysis results agree well with the test results. While the normal section bearing capacities calculated by formula of JGJ 138-2012 'the code for design of composite structure' and the fiber finite element model are conservative. In order to ensure good seismic behaviors of SPCW, the axial compression ratio should not be too high.
Persistent Identifierhttp://hdl.handle.net/10722/326101
ISSN
2020 SCImago Journal Rankings: 0.380

 

DC FieldValueLanguage
dc.contributor.authorWang, Jinjin-
dc.contributor.authorFan, Zhong-
dc.contributor.authorXing, Chao-
dc.contributor.authorFan, Jiansheng-
dc.contributor.authorWang, Jiaji-
dc.contributor.authorTao, Muxuan-
dc.contributor.authorYang, Zheng-
dc.date.accessioned2023-03-09T09:58:02Z-
dc.date.available2023-03-09T09:58:02Z-
dc.date.issued2016-
dc.identifier.citationJianzhu Jiegou Xuebao/Journal of Building Structures, 2016, v. 37, n. 7, p. 29-37-
dc.identifier.issn1000-6869-
dc.identifier.urihttp://hdl.handle.net/10722/326101-
dc.description.abstractAxial compression ratio is closely related to the seismic behavior of steel plate concrete composite shear walls(SPCW). Effects of axial compression ratio on the lateral stiffness, hysteretic behavior, energy dissipation capacity, ductility and bearing capacity of SPCW were analyzed by elasto-plastic finite element software. The results show that SPCW normal section bearing capacity changes along with axial compression ratio and reaches the maximum when the axial compression ratio is 0.4. SPCW has the maximum ductility and energy dissipation capacity when the axial compression ratio is in the range of 0.2 to 0.4. The deformation capacity, ductility and energy dissipation capacity decrease if the axial compression ratio exceeds 0.6. Meanwhile, axial compression ratio influences the initial lateral stiffness of SPCW. Lateral stiffness decreases with the cycles of reversed loading. To verify the reliability of the finite element analysis, a scaled compression-bending SPCW specimen test was carried out. The finite element analysis results agree well with the test results. While the normal section bearing capacities calculated by formula of JGJ 138-2012 'the code for design of composite structure' and the fiber finite element model are conservative. In order to ensure good seismic behaviors of SPCW, the axial compression ratio should not be too high.-
dc.languageeng-
dc.relation.ispartofJianzhu Jiegou Xuebao/Journal of Building Structures-
dc.subjectAxial compression ratio-
dc.subjectBearing capacity-
dc.subjectElasto-plastic finite element analysis-
dc.subjectQuasi-static test-
dc.subjectSteel plate concrete composite shear wall-
dc.titleResearch on effect of axial compression ratio on steel plate concrete composite shear walls-
dc.typeArticle-
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.14006/j.jzjgxb.2016.07.004-
dc.identifier.scopuseid_2-s2.0-84979256627-
dc.identifier.volume37-
dc.identifier.issue7-
dc.identifier.spage29-
dc.identifier.epage37-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats