File Download
  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Design and characterize of kirigami-inspired springs and the application in vertebrae exoskeleton for adolescent idiopathic scoliosis brace treatment

TitleDesign and characterize of kirigami-inspired springs and the application in vertebrae exoskeleton for adolescent idiopathic scoliosis brace treatment
Authors
Issue Date22-Mar-2023
PublisherFrontiers Media
Citation
Frontiers in Mechanical Engineering, 2023, v. 9 How to Cite?
Abstract

Adolescent idiopathic scoliosis is a common condition that affects children between the age of 10 and young adulthood. Rigid brace treatment is an effective treatment to control the progression of spinal deformity. However, it limits mobility and causes discomfort, which leads to low treatment compliance. In this study, we developed and characterized a kirigami-inspired CT/MRI compatible spring that could be employed to modify our previously designed exoskeleton hinge vertebrae to provide immediate in-brace correction, good wear comfort, and one that does not inhibit mobility simultaneously. Additive manufacturing has drawn significant interest in academic and industrial terms due to its ability to produce geometrically complex structures. The structural design and dimension of the proposed 3D printed kirigami-inspired springs were optimized with the finite element method (FEM). The carbon-fiber-reinforced nylon material (PA-CF) was selected as the material of the kirigami-inspired spring with the balance of printing easiness and performance of the material. The stiffness of designed kirigami-inspired springs varied between 1.20 and 42.01 N/mm. A case series study with three scoliosis patients has been conducted to investigate the immediate in-brace effect on reducing the spinal curvature and asymmetry of the body contours using radiographic examination. The experiment results show that there are 4.6%–50.5% improvements in Cobb angle for different sections of spines. The X-ray images proved that our kirigami-inspired springs would not block views for Cobb angle measurements.


Persistent Identifierhttp://hdl.handle.net/10722/328446
ISSN
2023 Impact Factor: 2.0
2023 SCImago Journal Rankings: 0.460

 

DC FieldValueLanguage
dc.contributor.authorLei, QE-
dc.contributor.authorShu, J-
dc.contributor.authorWang, JM-
dc.contributor.authorCheung, HY-
dc.contributor.authorCheung, JPY-
dc.contributor.authorWong, WF-
dc.contributor.authorLau, SCY-
dc.contributor.authorYip, J-
dc.contributor.authorTong, RKY-
dc.date.accessioned2023-06-28T04:45:00Z-
dc.date.available2023-06-28T04:45:00Z-
dc.date.issued2023-03-22-
dc.identifier.citationFrontiers in Mechanical Engineering, 2023, v. 9-
dc.identifier.issn2297-3079-
dc.identifier.urihttp://hdl.handle.net/10722/328446-
dc.description.abstract<p>Adolescent idiopathic scoliosis is a common condition that affects children between the age of 10 and young adulthood. Rigid brace treatment is an effective treatment to control the progression of spinal deformity. However, it limits mobility and causes discomfort, which leads to low treatment compliance. In this study, we developed and characterized a kirigami-inspired CT/MRI compatible spring that could be employed to modify our previously designed exoskeleton hinge vertebrae to provide immediate in-brace correction, good wear comfort, and one that does not inhibit mobility simultaneously. Additive manufacturing has drawn significant interest in academic and industrial terms due to its ability to produce geometrically complex structures. The structural design and dimension of the proposed 3D printed kirigami-inspired springs were optimized with the finite element method (FEM). The carbon-fiber-reinforced nylon material (PA-CF) was selected as the material of the kirigami-inspired spring with the balance of printing easiness and performance of the material. The stiffness of designed kirigami-inspired springs varied between 1.20 and 42.01 N/mm. A case series study with three scoliosis patients has been conducted to investigate the immediate in-brace effect on reducing the spinal curvature and asymmetry of the body contours using radiographic examination. The experiment results show that there are 4.6%–50.5% improvements in Cobb angle for different sections of spines. The X-ray images proved that our kirigami-inspired springs would not block views for Cobb angle measurements.<br></p>-
dc.languageeng-
dc.publisherFrontiers Media-
dc.relation.ispartofFrontiers in Mechanical Engineering-
dc.titleDesign and characterize of kirigami-inspired springs and the application in vertebrae exoskeleton for adolescent idiopathic scoliosis brace treatment-
dc.typeArticle-
dc.description.naturepublished_or_final_version-
dc.identifier.doi10.3389/fmech.2023.1152930-
dc.identifier.volume9-
dc.identifier.eissn2297-3079-
dc.identifier.issnl2297-3079-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats