A large-scale methane model by incorporating the surface water transport

Abstract

The effect of surface water movement on methane emissions is not explicitly considered in most of the current methane models. In this study, a surface water routing was coupled into our previously developed large-scale methane model. The revised methane model was then used to simulate global methane emissions during 2006–2010. From our simulations, the global mean annual maximum inundation extent is 10.6 ± 1.9 km2 and the methane emission is 297 ± 11 Tg C/yr in the study period. In comparison to the currently used TOPMODEL-based approach, we found that the incorporation of surface water routing leads to 24.7% increase in the annual maximum inundation extent and 30.8% increase in the methane emissions at the global scale for the study period, respectively. The effect of surface water transport on methane emissions varies in different regions: (1) the largest difference occurs in flat and moist regions, such as Eastern China; (2) high-latitude regions, hot spots in methane emissions, show a small increase in both inundation extent and methane emissions with the consideration of surface water movement; and (3) in arid regions, the new model yields significantly larger maximum flooded areas and a relatively small increase in the methane emissions. Although surface water is a small component in the terrestrial water balance, it plays an important role in determining inundation extent and methane emissions, especially in flat regions. This study indicates that future quantification of methane emissions shall consider the effects of surface water transport.