File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)

Article: From Skin Movement to Wearable Robotics: The Case of Robotic Gloves

TitleFrom Skin Movement to Wearable Robotics: The Case of Robotic Gloves
Authors
Keywordselastomer-constrained flat tube actuator
rehabilitation
skin motion measurement
soft robotic glove
wearable robot
Issue Date18-Jan-2024
PublisherMary Ann Liebert
Citation
Soft Robotics, 2024 How to Cite?
Abstract

Previous research on wearable robotics focused on developing actuation mechanisms while overlooking influences of skin movement. During finger flexion, skins on the opisthenar and finger back are stretched. Impeding such skin movement will obstruct normal finger motions. In this research, a statistical study on skin movement is proposed and conducted to quantify skin movement on human hands. Results of 30 subjects (15 men and 15 women) reveal that skin at the finger back extends by an average of 29.3 – 7.2% in fist clenching. Based on this study, design guidelines for robotic gloves are proposed, and nominal strain values at different hand regions are tabulated for references in robotic glove design. To explore the influence of skin movement on wearable robotics, an elastomer-constrained flat tube actuator is proposed based on which two prototype robotic gloves are developed: one with an ergonomic strap interface that has small constraint to skin motion, and the other based on the commonly used fabric glove that is supposed to have large constraint to skin motion. With the same power input to the robotic gloves, the strap-based design achieves a finger motion range of 2.5 times and a gripping force of 4.3 times that of the conventional fabric glove.


Persistent Identifierhttp://hdl.handle.net/10722/347144
ISSN
2023 Impact Factor: 6.4
2023 SCImago Journal Rankings: 2.430

 

DC FieldValueLanguage
dc.contributor.authorLiu, Hao-
dc.contributor.authorWu, Changchun-
dc.contributor.authorLin, Senyuan-
dc.contributor.authorXi, Ning-
dc.contributor.authorLou, Vivian WQ-
dc.contributor.authorHu, Yong-
dc.contributor.authorOr, Calvin KL-
dc.contributor.authorChen, Yonghua-
dc.date.accessioned2024-09-18T00:30:38Z-
dc.date.available2024-09-18T00:30:38Z-
dc.date.issued2024-01-18-
dc.identifier.citationSoft Robotics, 2024-
dc.identifier.issn2169-5172-
dc.identifier.urihttp://hdl.handle.net/10722/347144-
dc.description.abstract<p>Previous research on wearable robotics focused on developing actuation mechanisms while overlooking influences of skin movement. During finger flexion, skins on the opisthenar and finger back are stretched. Impeding such skin movement will obstruct normal finger motions. In this research, a statistical study on skin movement is proposed and conducted to quantify skin movement on human hands. Results of 30 subjects (15 men and 15 women) reveal that skin at the finger back extends by an average of 29.3 – 7.2% in fist clenching. Based on this study, design guidelines for robotic gloves are proposed, and nominal strain values at different hand regions are tabulated for references in robotic glove design. To explore the influence of skin movement on wearable robotics, an elastomer-constrained flat tube actuator is proposed based on which two prototype robotic gloves are developed: one with an ergonomic strap interface that has small constraint to skin motion, and the other based on the commonly used fabric glove that is supposed to have large constraint to skin motion. With the same power input to the robotic gloves, the strap-based design achieves a finger motion range of 2.5 times and a gripping force of 4.3 times that of the conventional fabric glove.</p>-
dc.languageeng-
dc.publisherMary Ann Liebert-
dc.relation.ispartofSoft Robotics-
dc.subjectelastomer-constrained flat tube actuator-
dc.subjectrehabilitation-
dc.subjectskin motion measurement-
dc.subjectsoft robotic glove-
dc.subjectwearable robot-
dc.titleFrom Skin Movement to Wearable Robotics: The Case of Robotic Gloves-
dc.typeArticle-
dc.identifier.doi10.1089/soro.2023.0115-
dc.identifier.scopuseid_2-s2.0-85184030951-
dc.identifier.eissn2169-5180-
dc.identifier.issnl2169-5172-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats