File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Conversion of one-step to two-step self-etch adhesives for improved efficacy and extended application

TitleConversion of one-step to two-step self-etch adhesives for improved efficacy and extended application
Authors
Issue Date2005
PublisherMosher & Linder, Inc. The Journal's web site is located at http://www.amjdent.com
Citation
American Journal Of Dentistry, 2005, v. 18 n. 2, p. 126-134 How to Cite?
AbstractPurpose: One-step self-etch adhesives have restricted use due to their acid-base incompatibility with auto-cured composites and their behavior as permeable membranes after polymerization. This study examined the feasibility of their conversion to two-step self-etch adhesives via the adjunctive use of a non-solvented, relatively hydrophobic resin coating. Methods: iBond, Xeno III and Adper Prompt were used either in multiple coats, or in a single coat followed by the use of a layer of Scotchbond Multi-Purpose Plus bond resin for coupling to light- and auto-cured composites. Four types of experiments were performed. Bonded specimens were examined with TEM after immersion in an ammoniacal silver nitrate tracer. Fluid flow measurements of iBond were conducted using the two application protocols to compare the permeability of the bonded dentin with the original smear layer. Permeability of vital dentin bonded with both application protocols were compared for the transudation of dentin fluid across the bonded dentin. Microtensile bond strengths of dentin bonded with the two protocols were examined for their compatibility with an auto-cured composite. Results: The results of the four experiments were complementary. iBond and Xeno III exhibited "apparent incompatibility" to auto-cured composites that resulted from their inherent permeability. This was confirmed by the presence of dentin fluid transudate on the adhesive surfaces when they were bonded to vital dentin. Conversely, Adper Prompt exhibited "true incompatibility" to auto-cured composites that was caused by adverse acid-base interaction, masking the inherent permeability of this adhesive. "True" and "apparent" incompatibility issues were eliminated upon their conversion to two-step self-etch adhesives.
Persistent Identifierhttp://hdl.handle.net/10722/66588
ISSN
2023 Impact Factor: 0.9
2023 SCImago Journal Rankings: 0.360
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorKing, NMen_HK
dc.contributor.authorTay, FRen_HK
dc.contributor.authorPashley, DHen_HK
dc.contributor.authorHashimoto, Men_HK
dc.contributor.authorIto, Sen_HK
dc.contributor.authorBrackett, WWen_HK
dc.contributor.authorGarcíaGodoy, Fen_HK
dc.contributor.authorSunico, Men_HK
dc.date.accessioned2010-09-06T05:47:38Z-
dc.date.available2010-09-06T05:47:38Z-
dc.date.issued2005en_HK
dc.identifier.citationAmerican Journal Of Dentistry, 2005, v. 18 n. 2, p. 126-134en_HK
dc.identifier.issn0894-8275en_HK
dc.identifier.urihttp://hdl.handle.net/10722/66588-
dc.description.abstractPurpose: One-step self-etch adhesives have restricted use due to their acid-base incompatibility with auto-cured composites and their behavior as permeable membranes after polymerization. This study examined the feasibility of their conversion to two-step self-etch adhesives via the adjunctive use of a non-solvented, relatively hydrophobic resin coating. Methods: iBond, Xeno III and Adper Prompt were used either in multiple coats, or in a single coat followed by the use of a layer of Scotchbond Multi-Purpose Plus bond resin for coupling to light- and auto-cured composites. Four types of experiments were performed. Bonded specimens were examined with TEM after immersion in an ammoniacal silver nitrate tracer. Fluid flow measurements of iBond were conducted using the two application protocols to compare the permeability of the bonded dentin with the original smear layer. Permeability of vital dentin bonded with both application protocols were compared for the transudation of dentin fluid across the bonded dentin. Microtensile bond strengths of dentin bonded with the two protocols were examined for their compatibility with an auto-cured composite. Results: The results of the four experiments were complementary. iBond and Xeno III exhibited "apparent incompatibility" to auto-cured composites that resulted from their inherent permeability. This was confirmed by the presence of dentin fluid transudate on the adhesive surfaces when they were bonded to vital dentin. Conversely, Adper Prompt exhibited "true incompatibility" to auto-cured composites that was caused by adverse acid-base interaction, masking the inherent permeability of this adhesive. "True" and "apparent" incompatibility issues were eliminated upon their conversion to two-step self-etch adhesives.en_HK
dc.languageengen_HK
dc.publisherMosher & Linder, Inc. The Journal's web site is located at http://www.amjdent.comen_HK
dc.relation.ispartofAmerican Journal of Dentistryen_HK
dc.titleConversion of one-step to two-step self-etch adhesives for improved efficacy and extended applicationen_HK
dc.typeArticleen_HK
dc.identifier.openurlhttp://library.hku.hk:4550/resserv?sid=HKU:IR&issn=0894-8275&volume=18&issue=2&spage=126&epage=134&date=2005&atitle=Conversion+of+one-step+to+two-step+self-etch+adhesives+for+improved+efficacy+and+extended+application++en_HK
dc.identifier.emailKing, NM: hhdbknm@hkucc.hku.hken_HK
dc.identifier.authorityKing, NM=rp00006en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.pmid15973833-
dc.identifier.scopuseid_2-s2.0-21644448334en_HK
dc.identifier.hkuros98108en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-21644448334&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume18en_HK
dc.identifier.issue2en_HK
dc.identifier.spage126en_HK
dc.identifier.epage134en_HK
dc.identifier.isiWOS:000229092000012-
dc.publisher.placeUnited Statesen_HK
dc.identifier.scopusauthoridKing, NM=7201762850en_HK
dc.identifier.scopusauthoridTay, FR=7102091962en_HK
dc.identifier.scopusauthoridPashley, DH=35448600800en_HK
dc.identifier.scopusauthoridHashimoto, M=35380578400en_HK
dc.identifier.scopusauthoridIto, S=55430686300en_HK
dc.identifier.scopusauthoridBrackett, WW=7003993829en_HK
dc.identifier.scopusauthoridGarcíaGodoy, F=7101863410en_HK
dc.identifier.scopusauthoridSunico, M=6505758350en_HK
dc.identifier.issnl0894-8275-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats