File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Influence of temperature and relative humidity on early bond strengths to dentine

TitleInfluence of temperature and relative humidity on early bond strengths to dentine
Authors
KeywordsChemicals And Cas Registry Numbers
Issue Date1995
PublisherElsevier Ltd. The Journal's web site is located at http://www.elsevier.com/locate/jdent
Citation
Journal Of Dentistry, 1995, v. 23 n. 1, p. 41-45 How to Cite?
AbstractThe effect of temperature and relative humidity (RH) on the early tensile bond strengths to bovine dentine of two bonding systems (Liner Bond System, and Scotchbond Multi-purpose), and an experimental system (KB-110) were tested. Two environmental conditions, room temperature (23 °C/50% RH) and oral temperature (30 °C/80% RH), were used in a controlled temperature and humidity chamber. Bond strengths were recorded immediately after, 10 min and 24 h following light curing. The tensile bond strengths did not vary between the two test conditions, but the mode of fracture was observed to change. The 30 °C/80% RH condition exhibited a slightly greater degree of adhesive type failures compared with the 23 °C/50% RH group. This was particularly so for the experimental system, indicating that different bonding systems may be more or less sensitive to changes in RH and temperature. Failures occurred partially or totally within the resin composite at the early test times, and it was concluded that the bond strengths of the systems tested tended to exceed the early cohesive strengths of the resin composite. © 1995.
Persistent Identifierhttp://hdl.handle.net/10722/90584
ISSN
2023 Impact Factor: 4.8
2023 SCImago Journal Rankings: 1.313
ISI Accession Number ID

 

DC FieldValueLanguage
dc.contributor.authorBurrow, MFen_HK
dc.contributor.authorTaniguchi, Yen_HK
dc.contributor.authorNikaido, Ten_HK
dc.contributor.authorSatoh, Men_HK
dc.contributor.authorInai, Nen_HK
dc.contributor.authorTagami, Jen_HK
dc.contributor.authorTakatsu, Ten_HK
dc.date.accessioned2010-09-17T10:05:15Z-
dc.date.available2010-09-17T10:05:15Z-
dc.date.issued1995en_HK
dc.identifier.citationJournal Of Dentistry, 1995, v. 23 n. 1, p. 41-45en_HK
dc.identifier.issn0300-5712en_HK
dc.identifier.urihttp://hdl.handle.net/10722/90584-
dc.description.abstractThe effect of temperature and relative humidity (RH) on the early tensile bond strengths to bovine dentine of two bonding systems (Liner Bond System, and Scotchbond Multi-purpose), and an experimental system (KB-110) were tested. Two environmental conditions, room temperature (23 °C/50% RH) and oral temperature (30 °C/80% RH), were used in a controlled temperature and humidity chamber. Bond strengths were recorded immediately after, 10 min and 24 h following light curing. The tensile bond strengths did not vary between the two test conditions, but the mode of fracture was observed to change. The 30 °C/80% RH condition exhibited a slightly greater degree of adhesive type failures compared with the 23 °C/50% RH group. This was particularly so for the experimental system, indicating that different bonding systems may be more or less sensitive to changes in RH and temperature. Failures occurred partially or totally within the resin composite at the early test times, and it was concluded that the bond strengths of the systems tested tended to exceed the early cohesive strengths of the resin composite. © 1995.en_HK
dc.languageengen_HK
dc.publisherElsevier Ltd. The Journal's web site is located at http://www.elsevier.com/locate/jdenten_HK
dc.relation.ispartofJournal of Dentistryen_HK
dc.subjectChemicals And Cas Registry Numbersen_HK
dc.subject.meshAdhesivenessen_HK
dc.subject.meshAdhesives - chemistryen_HK
dc.subject.meshAnimalsen_HK
dc.subject.meshCattleen_HK
dc.subject.meshComposite Resins - chemistryen_HK
dc.subject.meshDental Bondingen_HK
dc.subject.meshDentin - ultrastructureen_HK
dc.subject.meshDentin-Bonding Agents - chemistryen_HK
dc.subject.meshHumidityen_HK
dc.subject.meshMaterials Testingen_HK
dc.subject.meshResin Cementsen_HK
dc.subject.meshSurface Propertiesen_HK
dc.subject.meshTemperatureen_HK
dc.subject.meshTensile Strengthen_HK
dc.subject.meshTime Factorsen_HK
dc.titleInfluence of temperature and relative humidity on early bond strengths to dentineen_HK
dc.typeArticleen_HK
dc.identifier.emailBurrow, MF:mfburr58@hku.hken_HK
dc.identifier.authorityBurrow, MF=rp01306en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1016/0300-5712(95)90659-6-
dc.identifier.pmid7876415-
dc.identifier.scopuseid_2-s2.0-0029243803en_HK
dc.identifier.volume23en_HK
dc.identifier.issue1en_HK
dc.identifier.spage41en_HK
dc.identifier.epage45en_HK
dc.identifier.isiWOS:A1995QC74200006-
dc.publisher.placeUnited Kingdomen_HK
dc.identifier.scopusauthoridBurrow, MF=7005876730en_HK
dc.identifier.scopusauthoridTaniguchi, Y=7401540141en_HK
dc.identifier.scopusauthoridNikaido, T=7102059723en_HK
dc.identifier.scopusauthoridSatoh, M=8945002400en_HK
dc.identifier.scopusauthoridInai, N=6701635764en_HK
dc.identifier.scopusauthoridTagami, J=7005967527en_HK
dc.identifier.scopusauthoridTakatsu, T=35993686200en_HK
dc.identifier.issnl0300-5712-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats