File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: The effect of bonding system and composite type on adaptation of different C-factor restorations

TitleThe effect of bonding system and composite type on adaptation of different C-factor restorations
Authors
KeywordsAdaptation
Bonding system
C-factor
Issue Date2006
Citation
Dental Materials Journal, 2006, v. 25 n. 1, p. 45-50 How to Cite?
AbstractThis study evaluated the effect of two adhesive systems and four resin-based composites on the marginal sealing and cavity wall adaptation of restorations with different C-factors. Cylindrical cavities, 1 mm deep and 3 mm in diameter (C-factor = 2.3) or 2 mm in diameter (C-factor = 3), were prepared on superficial bovine dentin surfaces. The teeth were restored with Clearfil SE Bond or Single Bond adhesive system followed by hybrid (Photo Clearfil Bright or Z100) or flowable (Filtek Flow or Estelite LV) resin composite. After thermocycling, a dye penetration test was carried out to evaluate the degree of marginal leakage and cavity-wall gap formation. Cavity-wall gap formation increased when the C-factor increased from 2.3 to 3, except for Estelite LV resin composite. In terms of marginal sealing, Clearfil SE Bond showed better performance than Single Bond. When using Clearfil SE Bond, flowable composites improved resin composite adaptation to the cavity wall compared with hybrid composites.
Persistent Identifierhttp://hdl.handle.net/10722/90704
ISSN
2023 Impact Factor: 1.9
2023 SCImago Journal Rankings: 0.589
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorWattanawongpitak, Nen_HK
dc.contributor.authorYoshikawa, Ten_HK
dc.contributor.authorBurrow, MFen_HK
dc.contributor.authorTagami, Jen_HK
dc.date.accessioned2010-09-17T10:07:03Z-
dc.date.available2010-09-17T10:07:03Z-
dc.date.issued2006en_HK
dc.identifier.citationDental Materials Journal, 2006, v. 25 n. 1, p. 45-50en_HK
dc.identifier.issn0287-4547en_HK
dc.identifier.urihttp://hdl.handle.net/10722/90704-
dc.description.abstractThis study evaluated the effect of two adhesive systems and four resin-based composites on the marginal sealing and cavity wall adaptation of restorations with different C-factors. Cylindrical cavities, 1 mm deep and 3 mm in diameter (C-factor = 2.3) or 2 mm in diameter (C-factor = 3), were prepared on superficial bovine dentin surfaces. The teeth were restored with Clearfil SE Bond or Single Bond adhesive system followed by hybrid (Photo Clearfil Bright or Z100) or flowable (Filtek Flow or Estelite LV) resin composite. After thermocycling, a dye penetration test was carried out to evaluate the degree of marginal leakage and cavity-wall gap formation. Cavity-wall gap formation increased when the C-factor increased from 2.3 to 3, except for Estelite LV resin composite. In terms of marginal sealing, Clearfil SE Bond showed better performance than Single Bond. When using Clearfil SE Bond, flowable composites improved resin composite adaptation to the cavity wall compared with hybrid composites.en_HK
dc.languageengen_HK
dc.relation.ispartofDental Materials Journalen_HK
dc.subjectAdaptationen_HK
dc.subjectBonding systemen_HK
dc.subjectC-factoren_HK
dc.titleThe effect of bonding system and composite type on adaptation of different C-factor restorationsen_HK
dc.typeArticleen_HK
dc.identifier.emailBurrow, MF:mfburr58@hku.hken_HK
dc.identifier.authorityBurrow, MF=rp01306en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.4012/dmj.25.45en_HK
dc.identifier.scopuseid_2-s2.0-33745259279en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-33745259279&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume25en_HK
dc.identifier.issue1en_HK
dc.identifier.spage45en_HK
dc.identifier.epage50en_HK
dc.identifier.isiWOS:000237494500008-
dc.publisher.placeJapanen_HK
dc.identifier.scopusauthoridWattanawongpitak, N=37046347800en_HK
dc.identifier.scopusauthoridYoshikawa, T=7402717952en_HK
dc.identifier.scopusauthoridBurrow, MF=7005876730en_HK
dc.identifier.scopusauthoridTagami, J=7005967527en_HK
dc.identifier.issnl0287-4547-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats