File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: Hydrothermal growth of periodic ZnO nanorod arrays using polystyrene sphere templates

TitleHydrothermal growth of periodic ZnO nanorod arrays using polystyrene sphere templates
Authors
KeywordsHydrothermal growth
Periodic nanorod array
Zinc oxide
Issue Date2007
PublisherS P I E - International Society for Optical Engineering. The Journal's web site is located at http://spie.org/x1848.xml
Citation
Proceedings of SPIE, 2007, v. 6639, p. 66390I: 1-8 How to Cite?
AbstractZinc Oxide (ZnO) photonic crystals (PCs) are of great interest in recent years due to its potential applications in optoelectronic devices. However, most of the growth temperatures in fabricating ZnO nanostructures in periodic structures reported up to date are very high (>500°C), which is not favorable for low cost manufacture. In this work, a method involving low growth temperature (90°C), hydrothermal synthesis, was used to fabricate ZnO nanostructures. Self-assembly of polystyrene (PS) spheres was used to fabricate periodic arrays. PS spheres were self-assembled on the silicon (Si) or fluorine-doped tin oxide (FTO) substrate with ZnO seed layer derived from zinc acetate. After crosslinking the PS sphere layer, hydrothermal growth was performed. The influence of growth conditions (concentration, addition of PEI, etc.) on fabricated ZnO nanorod array has been studied. Then, PS spheres were removed by annealing in air, and fabricated ZnO nanorod arrays were studied by scanning electron microscopy (SEM) and photoluminescence (PL) spectroscopy. Periodicity of the array was strongly substrate dependent (better on Si than on FTO). Light emitting diodes were also fabricated in order to demonstrate the potential use of this ZnO periodic array.
Persistent Identifierhttp://hdl.handle.net/10722/96894
ISSN
2023 SCImago Journal Rankings: 0.152
References

 

DC FieldValueLanguage
dc.contributor.authorHsu, YFen_HK
dc.contributor.authorXi, YYen_HK
dc.contributor.authorDjurišić, ABen_HK
dc.contributor.authorChan, WKen_HK
dc.contributor.authorYip, CTen_HK
dc.contributor.authorTam, KHen_HK
dc.date.accessioned2010-09-25T16:48:55Z-
dc.date.available2010-09-25T16:48:55Z-
dc.date.issued2007en_HK
dc.identifier.citationProceedings of SPIE, 2007, v. 6639, p. 66390I: 1-8en_HK
dc.identifier.issn0277-786Xen_HK
dc.identifier.urihttp://hdl.handle.net/10722/96894-
dc.description.abstractZinc Oxide (ZnO) photonic crystals (PCs) are of great interest in recent years due to its potential applications in optoelectronic devices. However, most of the growth temperatures in fabricating ZnO nanostructures in periodic structures reported up to date are very high (>500°C), which is not favorable for low cost manufacture. In this work, a method involving low growth temperature (90°C), hydrothermal synthesis, was used to fabricate ZnO nanostructures. Self-assembly of polystyrene (PS) spheres was used to fabricate periodic arrays. PS spheres were self-assembled on the silicon (Si) or fluorine-doped tin oxide (FTO) substrate with ZnO seed layer derived from zinc acetate. After crosslinking the PS sphere layer, hydrothermal growth was performed. The influence of growth conditions (concentration, addition of PEI, etc.) on fabricated ZnO nanorod array has been studied. Then, PS spheres were removed by annealing in air, and fabricated ZnO nanorod arrays were studied by scanning electron microscopy (SEM) and photoluminescence (PL) spectroscopy. Periodicity of the array was strongly substrate dependent (better on Si than on FTO). Light emitting diodes were also fabricated in order to demonstrate the potential use of this ZnO periodic array.en_HK
dc.languageengen_HK
dc.publisherS P I E - International Society for Optical Engineering. The Journal's web site is located at http://spie.org/x1848.xmlen_HK
dc.relation.ispartofProceedings of SPIE - The International Society for Optical Engineeringen_HK
dc.subjectHydrothermal growthen_HK
dc.subjectPeriodic nanorod arrayen_HK
dc.subjectZinc oxideen_HK
dc.titleHydrothermal growth of periodic ZnO nanorod arrays using polystyrene sphere templatesen_HK
dc.typeConference_Paperen_HK
dc.identifier.emailDjurišić, AB: dalek@hku.hken_HK
dc.identifier.emailChan, WK: waichan@hku.hken_HK
dc.identifier.authorityDjurišić, AB=rp00690en_HK
dc.identifier.authorityChan, WK=rp00667en_HK
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1117/12.732329en_HK
dc.identifier.scopuseid_2-s2.0-42149118962en_HK
dc.identifier.hkuros148816en_HK
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-42149118962&selection=ref&src=s&origin=recordpageen_HK
dc.identifier.volume6639en_HK
dc.identifier.spage66390en_HK
dc.identifier.epage8en_HK
dc.publisher.placeUnited Statesen_HK
dc.identifier.scopusauthoridHsu, YF=16063930300en_HK
dc.identifier.scopusauthoridXi, YY=23053521800en_HK
dc.identifier.scopusauthoridDjurišić, AB=7004904830en_HK
dc.identifier.scopusauthoridChan, WK=13310083000en_HK
dc.identifier.scopusauthoridYip, CT=14043063100en_HK
dc.identifier.scopusauthoridTam, KH=8533246200en_HK
dc.identifier.issnl0277-786X-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats