File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: A generalized theory of boundary control for a single-phase multilevel inverter using second-order switching surface

TitleA generalized theory of boundary control for a single-phase multilevel inverter using second-order switching surface
Authors
KeywordsBoundary Control
Dc/Ac Conversion
Multilevel Inverters
Issue Date2009
Citation
Ieee Transactions On Power Electronics, 2009, v. 24 n. 10, p. 2298-2313 How to Cite?
AbstractAn extension of the use of the boundary control method using second-order switching functions for controlling single-phase multilevel inverters is presented in this paper. The time instant of switching the output voltage of the inverter bridge from one voltage level to another voltage level is governed by two second-order switching functions. The input variables of the switching functions are the input and output voltages of the inverter, reference output voltage, and output filter capacitor current. The switching functions are derived by first estimating the respective trajectories of the output voltage of the inverter with the two possible voltage levels from the inverter bridge supplying to the input of the output filter, and then formulating mathematical functions to approximate the two trajectories (one for each voltage level) that pass through the target operating point. The distinct feature of this method is that the output voltage of the inverter can reach the target operating point in two switching actions in the inverter bridge after the inverter is subjected to an external disturbance. Derivation of the switching functions and implementation of the controller will be given. Three single-phase inverter topologies, including cascaded five-level inverter, hybrid seven-level inverter, and three-level diode-clamped inverter, with the proposed control method have been built and tested. The steady-state and largesignal dynamic responses of the three inverters supplying to three different load types, including resistive, inductive, and nonlinear diode-capacitor circuits, will be discussed. © 2009 IEEE.
Persistent Identifierhttp://hdl.handle.net/10722/155540
ISSN
2023 Impact Factor: 6.6
2023 SCImago Journal Rankings: 3.644
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorChan, PKWen_US
dc.contributor.authorChung, HSHen_US
dc.contributor.authorHui, SYen_US
dc.date.accessioned2012-08-08T08:34:00Z-
dc.date.available2012-08-08T08:34:00Z-
dc.date.issued2009en_US
dc.identifier.citationIeee Transactions On Power Electronics, 2009, v. 24 n. 10, p. 2298-2313en_US
dc.identifier.issn0885-8993en_US
dc.identifier.urihttp://hdl.handle.net/10722/155540-
dc.description.abstractAn extension of the use of the boundary control method using second-order switching functions for controlling single-phase multilevel inverters is presented in this paper. The time instant of switching the output voltage of the inverter bridge from one voltage level to another voltage level is governed by two second-order switching functions. The input variables of the switching functions are the input and output voltages of the inverter, reference output voltage, and output filter capacitor current. The switching functions are derived by first estimating the respective trajectories of the output voltage of the inverter with the two possible voltage levels from the inverter bridge supplying to the input of the output filter, and then formulating mathematical functions to approximate the two trajectories (one for each voltage level) that pass through the target operating point. The distinct feature of this method is that the output voltage of the inverter can reach the target operating point in two switching actions in the inverter bridge after the inverter is subjected to an external disturbance. Derivation of the switching functions and implementation of the controller will be given. Three single-phase inverter topologies, including cascaded five-level inverter, hybrid seven-level inverter, and three-level diode-clamped inverter, with the proposed control method have been built and tested. The steady-state and largesignal dynamic responses of the three inverters supplying to three different load types, including resistive, inductive, and nonlinear diode-capacitor circuits, will be discussed. © 2009 IEEE.en_US
dc.languageengen_US
dc.relation.ispartofIEEE Transactions on Power Electronicsen_US
dc.subjectBoundary Controlen_US
dc.subjectDc/Ac Conversionen_US
dc.subjectMultilevel Invertersen_US
dc.titleA generalized theory of boundary control for a single-phase multilevel inverter using second-order switching surfaceen_US
dc.typeArticleen_US
dc.identifier.emailHui, SY:ronhui@eee.hku.hken_US
dc.identifier.authorityHui, SY=rp01510en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.doi10.1109/TPEL.2009.2028630en_US
dc.identifier.scopuseid_2-s2.0-70349102939en_US
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-70349102939&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume24en_US
dc.identifier.issue10en_US
dc.identifier.spage2298en_US
dc.identifier.epage2313en_US
dc.identifier.isiWOS:000269517500001-
dc.publisher.placeUnited Statesen_US
dc.identifier.scopusauthoridChan, PKW=27171596000en_US
dc.identifier.scopusauthoridChung, HSH=7404007467en_US
dc.identifier.scopusauthoridHui, SY=7202831744en_US
dc.identifier.issnl0885-8993-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats