File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: All-metal domestic induction heating using single-frequency double-layer coils

TitleAll-metal domestic induction heating using single-frequency double-layer coils
Authors
KeywordsMagnetics
Conferences
coils
domestic appliances
induction heating
Issue Date2018
PublisherInstitute of Electrical and Electronics Engineers. The Journal's web site is located at http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=20
Citation
IEEE International Magnetics Conference, Singapore, 23-27 April 2018. In IEEE Transactions on Magnetics, 2018, p. article no. 8508396 How to Cite?
AbstractIn the past few decades, induction heating based on near-field magnetic coupling has been actively developed, aiming to improve the efficiency, controllability and safety. For traditional induction heating, the heating coil is energized by an AC power source to generate an alternating magnetic field, which in turn induces the eddy current in the workpiece to produce the heating effect [1]. Nevertheless, the workpiece made of non-ferromagnetic materials like stainless steel, aluminum and copper cannot be properly heated, which dramatically limits its application as compared with traditional open-fire heating. There was an attempt to heat the non-ferromagnetic workpiece using a strong magnetic field provided by superconducting windings [2], but it was not practical for domestic induction heating. By using low-frequency AC (around 20 kHz) to heat the ferromagnetic pan and high-frequency AC (over 70 kHz) to heat the non-ferromagnetic pan, the selective operating frequency technique was developed for all-metal domestic induction heating [3]. However, the corresponding switching and winding losses significantly increased, which inevitably resulted in low heating efficiency. In addition, the frequency selection caused serious electromagnetic interference and increased complexity and cost. Recently, the homogeneity and flexibility of induction heating has been improved by adopting the magnetic resonant coupling (MRC) mechanism [4], [5]. In this paper, a new all-metal domestic heating system is proposed and implemented. The key is to employ double-layer coils and utilizes the MRC mechanism to induce a high current in the resonant coil when heating the non-ferromagnetic pans, thus successfully heating both the ferromagnetic and non-ferromagnetic pans at 30 kHz resonant frequency. Consequently, the advantages of simplicity, high heating efficiency and single operating frequency can be attained for all-metal induction heating.
Persistent Identifierhttp://hdl.handle.net/10722/259712
ISBN
ISSN
2023 Impact Factor: 2.1
2023 SCImago Journal Rankings: 0.729

 

DC FieldValueLanguage
dc.contributor.authorHan, W-
dc.contributor.authorChau, KT-
dc.contributor.authorJiang, C-
dc.contributor.authorLiu, W-
dc.date.accessioned2018-09-03T04:12:37Z-
dc.date.available2018-09-03T04:12:37Z-
dc.date.issued2018-
dc.identifier.citationIEEE International Magnetics Conference, Singapore, 23-27 April 2018. In IEEE Transactions on Magnetics, 2018, p. article no. 8508396-
dc.identifier.isbn9781538664254-
dc.identifier.issn0018-9464-
dc.identifier.urihttp://hdl.handle.net/10722/259712-
dc.description.abstractIn the past few decades, induction heating based on near-field magnetic coupling has been actively developed, aiming to improve the efficiency, controllability and safety. For traditional induction heating, the heating coil is energized by an AC power source to generate an alternating magnetic field, which in turn induces the eddy current in the workpiece to produce the heating effect [1]. Nevertheless, the workpiece made of non-ferromagnetic materials like stainless steel, aluminum and copper cannot be properly heated, which dramatically limits its application as compared with traditional open-fire heating. There was an attempt to heat the non-ferromagnetic workpiece using a strong magnetic field provided by superconducting windings [2], but it was not practical for domestic induction heating. By using low-frequency AC (around 20 kHz) to heat the ferromagnetic pan and high-frequency AC (over 70 kHz) to heat the non-ferromagnetic pan, the selective operating frequency technique was developed for all-metal domestic induction heating [3]. However, the corresponding switching and winding losses significantly increased, which inevitably resulted in low heating efficiency. In addition, the frequency selection caused serious electromagnetic interference and increased complexity and cost. Recently, the homogeneity and flexibility of induction heating has been improved by adopting the magnetic resonant coupling (MRC) mechanism [4], [5]. In this paper, a new all-metal domestic heating system is proposed and implemented. The key is to employ double-layer coils and utilizes the MRC mechanism to induce a high current in the resonant coil when heating the non-ferromagnetic pans, thus successfully heating both the ferromagnetic and non-ferromagnetic pans at 30 kHz resonant frequency. Consequently, the advantages of simplicity, high heating efficiency and single operating frequency can be attained for all-metal induction heating.-
dc.languageeng-
dc.publisherInstitute of Electrical and Electronics Engineers. The Journal's web site is located at http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=20-
dc.relation.ispartofIEEE Transactions on Magnetics-
dc.rightsIEEE Transactions on Magnetics. Copyright © Institute of Electrical and Electronics Engineers.-
dc.rights©20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.-
dc.subjectMagnetics-
dc.subjectConferences-
dc.subjectcoils-
dc.subjectdomestic appliances-
dc.subjectinduction heating-
dc.titleAll-metal domestic induction heating using single-frequency double-layer coils-
dc.typeConference_Paper-
dc.identifier.emailChau, KT: ktchau@eee.hku.hk-
dc.identifier.authorityChau, KT=rp00096-
dc.description.naturelink_to_subscribed_fulltext-
dc.identifier.doi10.1109/INTMAG.2018.8508396-
dc.identifier.scopuseid_2-s2.0-85066806845-
dc.identifier.hkuros289346-
dc.identifier.issue99-
dc.identifier.spagearticle no. 8508396-
dc.identifier.epagearticle no. 8508396-
dc.publisher.placeUnited States-
dc.identifier.issnl0018-9464-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats