File Download
  Links for fulltext
     (May Require Subscription)
Supplementary

Article: High-power single-mode operation in DFB and FP lasers using diffused quantum-well structure

TitleHigh-power single-mode operation in DFB and FP lasers using diffused quantum-well structure
Authors
KeywordsAnnealing
Diffusion processes
Distributed feedback lasers
Fabry–perot resonators,
Laser modes
Issue Date1997
PublisherIEEE.
Citation
IEEE Journal of Quantum Electronics, 1997, v. 33 n. 6, p. 999-1009 How to Cite?
AbstractDistributed feedback (DFB) and Fabry-Perot (FP) semiconductor lasers with step and periodic interdiffusion quantum-well structures are proposed for high-power single-longitudinal-mode operation. It is shown that the phase-adjustment region formed by the diffusion step (i.e., step change in optical gain and refractive index) counteracts the influence of spatial hole burning, especially for DFB lasers with large coupling-length products biased at high injection current. Furthermore, it is found that with careful design of the diffusion grating (i.e., grating period and amount of diffusion extent) of FP lasers, side-mode suppression ratio can be enhanced and threshold current density can be minimized to a satisfied level.
Persistent Identifierhttp://hdl.handle.net/10722/42745
ISSN
2023 Impact Factor: 2.2
2023 SCImago Journal Rankings: 0.563
ISI Accession Number ID

 

DC FieldValueLanguage
dc.contributor.authorYu, SFen_HK
dc.contributor.authorLo, CWen_HK
dc.contributor.authorLi, EHen_HK
dc.date.accessioned2007-03-23T04:31:21Z-
dc.date.available2007-03-23T04:31:21Z-
dc.date.issued1997en_HK
dc.identifier.citationIEEE Journal of Quantum Electronics, 1997, v. 33 n. 6, p. 999-1009en_HK
dc.identifier.issn0018-9197en_HK
dc.identifier.urihttp://hdl.handle.net/10722/42745-
dc.description.abstractDistributed feedback (DFB) and Fabry-Perot (FP) semiconductor lasers with step and periodic interdiffusion quantum-well structures are proposed for high-power single-longitudinal-mode operation. It is shown that the phase-adjustment region formed by the diffusion step (i.e., step change in optical gain and refractive index) counteracts the influence of spatial hole burning, especially for DFB lasers with large coupling-length products biased at high injection current. Furthermore, it is found that with careful design of the diffusion grating (i.e., grating period and amount of diffusion extent) of FP lasers, side-mode suppression ratio can be enhanced and threshold current density can be minimized to a satisfied level.en_HK
dc.format.extent265506 bytes-
dc.format.extent28160 bytes-
dc.format.mimetypeapplication/pdf-
dc.format.mimetypeapplication/msword-
dc.languageengen_HK
dc.publisherIEEE.en_HK
dc.relation.ispartofIEEE Journal of Quantum Electronics-
dc.rights©1997 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.-
dc.subjectAnnealingen_HK
dc.subjectDiffusion processesen_HK
dc.subjectDistributed feedback lasersen_HK
dc.subjectFabry–perot resonators,en_HK
dc.subjectLaser modesen_HK
dc.titleHigh-power single-mode operation in DFB and FP lasers using diffused quantum-well structureen_HK
dc.typeArticleen_HK
dc.identifier.openurlhttp://library.hku.hk:4550/resserv?sid=HKU:IR&issn=0018-9197&volume=33&issue=6&spage=999&epage=1009&date=1997&atitle=High-power+single-mode+operation+in+DFB+and+FP+lasers+using+diffused+quantum-well+structureen_HK
dc.description.naturepublished_or_final_versionen_HK
dc.identifier.doi10.1109/3.585488en_HK
dc.identifier.scopuseid_2-s2.0-0031162317-
dc.identifier.hkuros26962-
dc.identifier.isiWOS:A1997XA68300015-
dc.identifier.issnl0018-9197-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats